Multi - Functional Combination Indoor Play Equipment For Big Space KP190626

What are the design points of the rides?

There are a lot of standardized rides on the market, and designers always like to create their own designs, tailoring a particular playground to its own characteristics, and these special rides give the playground a unique character. Building a ride not only requires an interesting and attractive design, but also ensures that the child is absolutely safe after the facility is built. The choice of basic materials is as important as the surface finish and the addition of parts that prevent falls.

First, the selection of materials

Durable, hygienic and easy-to-maintain materials should be used to build the rides. Potentially toxic materials and unprocessed metal (rusted or used as wires) should not be used in rides. The metal must be painted, plated or rust-proofed. Wood is a good metal substitute, but it must be the same kind of wood without cracks, in any case, after cracking and irregular breakage (not just the surface). If synthetic materials are chosen, they must be durable and resistant to cracking. Surface polishing, especially rough and uneven materials, is one of the basic steps to reduce the risk of injury.

Second, the design of the handrails and railings

Handrails and railings are common safety devices in rides. Handrails and railings not only prevent falling, but they also support and stabilize when held while walking. Therefore, it should be designed to be easy to grasp according to relevant regulations. The height and diameter of the side protection facilities are determined by their location, whether on ladders, slopes, sidewalks or raised platforms, in accordance with local regulations.

Third, the role of the boundary

Whether or not the boundary is set depends on the age of the ride user and the climbable height of the children. Thanks to the guardrail, the border prevents children from falling from the raised platform and prevents them from climbing too high. Therefore, the design of the border should prevent climbing, standing or sitting on it. Therefore, the boundary should enclose the raised plane, leaving only one opening into and out of the platform. The opening should be smaller than the child's body to prevent the child from slipping or getting stuck in the gap. The height of the boundary from the surface of the platform, ladder or slope should be at least 70 cm.

Fourth, the design of the support

Many rides have a supporting function that provides support for the hands and feet for gripping, balancing and climbing. The size and position of the effective handle should be suitable for the child to grasp, and the handle is firmly fixed to the main structure to prevent them from falling off and rotating.

5. Installation of seams, screws and edges

Such facilities include the outer edge of the ride and the part system of the installed equipment. For safety reasons, sharp edges, sharp shapes and dangerous corners should be avoided. To ensure that the surface of the welded part is smooth, the parts that anchor or support the structure should be strong and stable. The nails should be flush into the main structure, the screws should be covered with plastic caps, and the raised parts should not exceed the standard.

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.