IP54 30 person/minute passing speed retractable DC24 Brushless
Motor Drive flap barrier turnstile
Introduction of Flap Barrier Gate
Sinomatic flap barrier gate integrating with mechanism, electron,
microprocessor and various identification technology is compatible
with card reader devices such as IC card, ID card, bar code,
fingerprint and so on. By configuring all kinds of identification
devices and adopting reliable safeguard devices, alarm devices,
direction indicator etc, it is able to achieve access
intelligetilized control and management.
| Description | Parameters |
| Lane Width | 550-600mm |
| IP | IP54 |
| Pass Speed | 30 persons/min |
| Power supply | AC220V/110V,50/60Hz |
| Drive Mode | Motor drive |
| Max Power Consumption | 200W |
| Opening time | 0.4S |
| Humidity | ≤90% coagulation free |
| Noise | ≤50dB |
| Service Life | 5,000,000 cycles |
| Outside packing | 130x40x116 cm |
| Working Environment | -20°C~+60°C |
| Gross Weight | 100KGS |
PRODUCT DIMENSION
Features of Flap Barrier Gate
1.With fault self-test and alarm prompt function, convenient for
user maintenance and use.
2.Through the built-in small push-pull on the main control board,
device operating state can be programed.
3.The mechanical structure has anti-pinch and anti-collision
function. When the swing arm is blocked during the reset process,
the motor automatically stops working within the specified time.
Reset again after the default delay (until reset), and the force is
very small (≤ 2kg).
4. Illegal intrusion, trailing alarm, reverse intrusion gate
automatically closes
5.Anti-shock function, the arm is automatically locked when no open
signal is received.
6.Telescopic arms are adjustable synchronously (for double
pendulum)
7.With automatic reset function. After the switch is opened, the
system will automatically cancel the user's permission for the pass
when there is no pass within the specified time.The reset time is
adjustable from 1s to 60s (the system default time is 10s). After
the power is cut off, the channel is automatically opened (in
accordance with fire protection requirements), and the power-on
channel is automatically closed.
8.Infrared sensor reset, infrared sensor anti-trap function
(configure 5 pairs of infrared)
9.It can be connected with a variety of devices such as access
control systems, consumer systems, electronic ticket systems,
biometric systems, and electrostatic testers.
10.The one-way or two-way control personnel can enter and exit, and
the infrared sensing in and out channels.
11.Voice prompt function.
12.Remote control and management can be achieved directly through
the management computer.
Case of Flap Barrier Gate
Why choose us:
1. Our Factory has 17 years OEM/ODM experiences in the line of
access control turnstile and barrier.
2. Prompt delivery time. Usually we keep stock of standard model
which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample order and test
it before bulk order.
5. Online technical support makes it carefree to be our business
partner.
6. A variety of transportation for your choice. Sea shipment, air
cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly
welcome to visit our factory.
