Thin Precision Argentum / Copper Fuse Band with One Cavity
Progressive Die Stamping
Material:AG / copper
thickness - 0.06 , 0.08 , 0.09 , 0.1 , 0.11 , 0.12 , 0.13 , 0.14 ,
0.16mm
Band width-5,10,15,20,25 and 30mm.
The tooling lifetime is more than 5 million strokes in good
running.During this time ,You may need grinding the tool edge if it
is no so sharp.And pls do not let the scrap in the tooling.If the
scrap fall in the tooling.It is easy broken.We add low pressure air
blow-down system in the die.This can make sure the die safe.
Components stamping we produce through our customs precision metals
stamping including:
Electronic connectors,Heat sinks,Transfer stampings,Printer
cartridge blades,Medical components,Die insert ,Furniture
parts,Sensor components,Thrust washers,Spring metal parts
We have invested in a range of capabilities to lower your cost,
speed new parts development, and capability with your needs. Our
press capabilities range from small part to big part.
Our quality team assures compliance and works with our production
team to assure conformance with your requirements, our internal
standards, and the requirements of our various external
certification bodies.
Our production and quality QC measuring with optical comparators,
multiple high-precision Zeiss measurement machines, and
high-precision gauge construction and maintenance capabilities.To
make sure customer demand.
| General Gapabilities | Production stamping,punching ,stamping die,tooling,Prototype |
| Production Method | Progressive Die,Single Hit |
| Stamping Features | Blanking,Deep Draw,Countersunk,Coining |
| Press Range | 35 tons to 160 tons |
| Part Length | Up to 500mm |
| Part Width | Up to 400mm |
| Part Material Thickness | 0.1mm in to 5mm |
| Production Volume | High Volume,Large Run,Long Run |
| Additional Services Provided | Assembly,Washing,Deburring,Coating,Heat Treating |
| Industry Focus | Transportation,Agricultural,Consumer Products,Bracket
Markets,Service Industries |
| File Formats | AutoCAD (dwg,dxf),ProE,UG,iges,Initial Graphics Exchange
Specification,pdf,JPG |
FAQ
Q: What’s your manufacture capability?
---- We use Sodick/Charmilles to frabricate die inserts,dimension
we can do is +/-0.002mm.
Q: Can you make all the dimensions are according to our
design/samples?
---- We can guarantee that all the dimensions are made according to
your drawing/sample.Please notice that dimension tolerence we can
do is +/-0.003mm.
Q: What’s your advantage compare with other supplier’s on the
market?
---- We are stamping factory,have a team contains die
design,making,maintance and stamping production.We know how
important the good mold for stamping production.So the metal
stamping parts is better that other factories.
---- All our engineers are with more than 10 years working
experience.They are more professional on precision stamping field.
