Hydraulic Stationary Concrete Pump / Performance Concrete Pumping
Product introduction HBT100SR18186C
ZOOMWOLF concrete pumpHBT100SR18186C
This is a high output pressure(18MPa) concrete pump,powered by
diesel engine.
Technical performance:
Output capacity(m3/h):57(high pres.)/103(low pres.)
Output pressure(MPa):18(high pres.)/10(low pres.)
Distribution Valve:S valve
Rated power of BF6M1013 diesel engine(kW):186
Oil pres.of the pumping system(MPa):32
Hydraulic system circle form:Twin-pump and -circuit open system.
Oil tank volume(L):500
Overall dimension L×W×H(mm):6460×1962×2620
Total mass(kg):6685
Use concrete pumps safely
1 Use concrete pump according to the operating instructions and
other safety regulations．
2 All devices that prevent accident such as warning notices,
barrier and metal baffle are kept complete and used normally, and
nobody can modify and cancel them!
3 For high pressure pumping,if oil pressure exceeds 22Mpa,operator
must take the following safety measures:
● Periodically replace the delivery couplings,gaskets and bend
pipes within 3m to the operator．
● Separate delivery lines in whose hazard zone(1ess than
3m)operators have to set foot must be screened with wooden boards
or metal etc．
9-fig.(1)Use concrete pumps safely
Pumping resistance and concrete pump selection
The pumping resistance determines the technical scheme of concrete
pumping construction.
Although we can not calculate the pumping resistance accurately, we
can make a preliminary calculation according to the theoretical
research results and practical experience data, and get the results
for reference.
In this way, the blind pursuit of high value of concrete pump
outlet pressure, resulting in the phenomenon of "the big horse
pulled the little cart" (such a scheme is neither economical nor
safe).
The calculation method of pumping resistance can be carried out in
accordance with appendix B of< JGJ/T 10-2011 Technical
specification for construction of concrete pumping>.
10-fig.(1)Calculation of pumping resistance
