100SR18186C High Efficiency Diesel Concrete Pump Oil Absorption And
Oil Return Filtration Technology
Product introduction HBT100SR18186C
ZOOMWOLF concrete pumpHBT100SR18186C
This is a high output pressure(18MPa) concrete pump,powered by
diesel engine.
Technical performance:
Output capacity(m3/h):57(high pres.)/103(low pres.)
Output pressure(MPa):18(high pres.)/10(low pres.)
Distribution Valve:S valve
Rated power of BF6M1013 diesel engine(kW):186
Oil pres.of the pumping system(MPa):32
Hydraulic system circle form:Twin-pump and -circuit open system.
Oil tank volume(L):500
Overall dimension L×W×H(mm):6460×1962×2620
Total mass(kg):6685
Vertical rising pipeline laying
① The rising lines can be laid along elevator well,scaffold or
through prefab hole of floor in order to dismantle pipelines
conveniently．
② Use new delivery lines when laying rising lines；when height is
big,the thick wall pipes must be used at the bottom and are easy to
dismantle；Elbows of vertical pipelines can't be used for the
purpose of supporting,every lines should be supported by 1-2
bolsters．Straight and bent pipes must be fixed on
wall,scaffold,tower or lift well in order to conduct the concrete
gravity of lines from bolsters into the building．
③ As the vertical lines rise to a great height,the delivery
concrete may incline to flow backwards,and give an impact to S
valve．In order to reduce the shock,a certain length of horizontal
lines should be laid between the machine and vertical lines to
resist the concrete flowing backwards．The length of horizontal
lines is not less than the 15％length of the vertical lines,and the
shut-off valve should be installed at the horizontal lines of
machine outlet,if delivery the concrete at high level．
④ If the pumping distance is very high and the volume of concrete
output is large,you can lay two group parallel lines．If one group
line is blocked,another pipeline can continue working．
