Specification
1. Machine Name: CNC V-CUT machine YSVC-1200 .
2, Power: AC220V ± 5V, 1 ¢ 50HZ 5KVA (requirements must be equipped
with a power regulator)
3, The gas source: 0.5Mpa 50NL / Min
4,Vacuum: The minimum amount of wind 15m3 / min; minimum static
pressure 50mm / Aq
5, Machining maximum size: 1250mm * 650mm
6, Processing minimum size: 105mm * 105mm
7. Board Thickness: 0.4mm ~ 3.2mm
8, Precision: Parallel accuracy ± 0.05mm, residual thickness
precision: ± 0.05mm, pitch: ± 0.05mm Alignment of the upper and
lower blade ± 0.05mm
9, The processing position: the distance from the first cutter to
edge minimum 8mm, a single side of the cutting line processing
unlimited number, can be set arbitrarily.
10. Machine dagger count: the number of machine processing jump
knife blade and knife position can be arbitrarily set the number .
11. The residual thickness setting: the machine has three types of
residual thickness can be set to three different shades of a single
surface residual thickness.
12. The machine structure: machine adopts casting machine base
integrated design approach, to ensure the stability of machine
performance.
13. Machine Size: L2400mm * W1900mm * H1600mm
14. Machine Weight: 3800KG
Second, the operating system
1. The machine uses Microsoft WindowsXP system, all english
operation interface, easy to understand, approachable,Parameter
setting procedure is simple. First, set the number of dimensions of
the plate, followed by setting the position of the cutting line
data, againSet to complete the processing of the residual
thickness.
2. The machine displays illustrations, real-time tracking process
icon displays the current processing position, allowing the
operator In real time to understand the whole process.
3. The machine has a test function, to avoid improper setting data
sheet of scrap in the complete data set after the first board using
tests to test cutting short distance to check the cutting position
and the actual position is consistent, as can not match the
parameter correction processing.
4. Machine tool protection function is set to avoid residual
thickness and tool set to set the outer diameter of improper the
tool is damaged.
Third, the machine hardware configuration
1. The machine axes were performed using imported servo control
system to ensure the stability and performance of the machine
precision, pushing the plate axis,Knife shaft and on the knife-axis
servo and servo motors, servo wheel servo and servo motors.
2.The main control by the United States six-axis motion control
card.
Blades :
