Tube Filter 40khz Ultrasonic Pipe Cleaner Oil Rust Removing /
Degreasing
ULTRASONIC CLEANING CHARACTERISTICS
Ultrasonic cleaning uses high frequency sound waves to generate
cavitation in the liquid. The resulting energetic bubbles act on
contaminants adhering to substrates like metals, plastics,
glass,rubber,ceramic, etc. This action penetrates blind holes,
cracks, and recesses to thoroughly remove all traces of
contamination adhering or embedded on the solid surface.
Contaminants can include dust, dirt, oil, pigments, grease,
polishing compounds, flux agents, soot, and so on. Ultrasonic
cleaning can be used for a wide range of workpiece shapes, sizes,
and materials, and may not require the part to be disassembled
prior to cleaning.
Ultrasonic Cleaning Equipment for Ultimate Cleaning Power
The Ultrasonic Cleaning Process
When ultrasonic energy is introduced into a cleaning solution,
cavitation, the foundation of ultrasonic cleaning occurs.
Ultrasonic energy causes alternating patterns of low and high
pressure phases. During the low pressure phases, minute bubbles –
or vacuum cavities form.
During the subsequent high pressure phases, cavitation takes place,
where the bubbles implode violently. Cavitation provides an intense
scrubbing action that leads to unsurpassed cleaning speed when
compared with simple soaking or immersion with agitation.
Additionally, the bubbles are small enough to penetrate even
microscopic crevices.
The Basic Ultrasonic Cleaning System
A generator, a transducer and a tank make up our ultrasonic cleaning system.
The generator supplies electrical power to the transducer, which
converts to mechanical energy in the form of pressure waves.
Ultrasonic energy enters the cleaning solution in the tank,
generating the cavitation that precision-cleans its contents.
The Advantages of Precise Instruments ultrasonic cleaning machine
Ultrasonic cleaning machine delivers high performance industrial
strength, cleaning action on Engine block, carburetor and Engine
parts
01: Cleans carbon deposits from carburetors and all manner of
engine parts
02: Removes stubborn oil grease, lubricants, paint, rust, and dirty
(with-pre-cleaning in same cases
03: Precise Instruments
04: Penetrates deep into the part and cleans holes, small apertures
and crevices
05: Clean sensitive parts like wiring and plastic without damage
06: Does not require line-of-sight for effective cleaning
07: Ensures part longevity due to high degree of cleanliness
AG Engine block ultrasonic cleaning machine are revolutionizing
cleaning methods and processes on the automotive and mechanic shop
floor, our Engine block ultrasonic cleaning machine can clean all
kinds of automotive, aircraft, and marine engine parts, ultrasonic
technology for cleaning parts eliminates manual labor while
providing you with superior cleaning action, most parts can be
cleaned with environmentally friendly water-based solutions
Ultrasonic cleaning machines work on the principle of agitating
cleaning solvents using high frequency sound waves, the ultrasonic
agitation creates millions of microscopic bubbles that implode
releasing vast quantities of energy, this action, know as
cavitations, dislodges any contaminant stuck to the surface of a
part, ultrasonic cavitations thoroughly cleans every surface in
contact with the cleaning fluid
While ultrasonic cleaning is the perfect deep cleaning solution for
engine parts, choosing the right combination of cleaning machine
and its cleaning chemistry can get a bit tricky, need help in
selecting, these are several basics you need to know, this is where
we come in, call AG and our engineer will help you select the right
cleaning machine and machine chemistry
Ultrasonic cleaning machines work on the principle of agitating
cleaning solvents using high frequency sound waves, the ultrasonic
agitation creates millions of microscopic bubbles that implode
releasing vast quantities of energy, this action, know as
cavitations, dislodges any contaminant stuck to the surface of a
part, ultrasonic cavitations thoroughly cleans every surface in
contact with the cleaning fluid
Model: T-30S details:
| Model | T-30S (digital timer&heater, Power adjustable) |
| Capacity | 108liter |
| Tank size | 600x450x400mm (LxWxH) |
| Unit size | 730x618x700mm (LxWxH) |
| Packaging size | 850x708x850mm (wooden case) |
| Ultrasonic power | 600~1500W adjustable |
| Heating power | 3000W |
| Timer | 1~99mins adjustable |
| Heater | 20~80C adjustable |
| Frequency | 40,000Hz |
| Power supply | AC110~130V, AC 220~240V, 50/60 Hz |
| Tank material | SUS304, 2mm thickness |
| Shell Material | SUS304, 1mm thickness |
| Others | With drainage, basket, lid |
| N.W./ G.W. | 73KG/98KG |
| Warranty | 1 year& tech support for life |
