Excellent performance and rational construction dust catcher hot
sale
Description:
A dust collector is a system used to enhance the quality of air
released from industrial and commercial processes by collecting
dust and other impurities from air or gas. Designed to handle
high-volume dust loads, a dust collector system consists of a
blower, dust filter, a filter-cleaning system, and a dust
receptacle or dust removal system. It is distinguished from air
purifiers , which use disposable filters to remove dust.
Dust collectors are used in many processes to either recover
valuable granular solid or powder from process streams, or to
remove granular solid pollutants from exhaust gases prior to
venting to the atmosphere. Dust collection is an online process for
collecting any process-generated dust from the source point on a
continuous basis. Dust collectors may be of single unit
construction, or a collection of devices used to separate
particulate matter from the process air. They are often used as an
air pollution control air device to maintain or improve air
quality.
Details:
Feature:
1. High efficiency≥99.5%
2. Low emission concentration ≤20um, but also ≤10um is possible
after filtering according to practical situation
3. Low leakage rate
4. Material—carbon steel or stainless steel.
5. Simple Structure, easy maintenance
6. Suitable bags and bag cages fitted according to dust properties.
Glass Fiber, needle felt, PTFE, p84., etc
7. The overhaul and bag replacement can be carried out for separate
chamber under the condition that system blower and system run
normally.
8. The whole set of equipment is controlled by PLC to realize
automatic dust cleaning, dust removal, automatic temperature
control and over temperature alarm
9. It is not sensitive to the characteristics of the dust, and it
is not affected by dust and resistance.
Issues to be aware of:
| 1. The first thing we need to determine is whether the condensation
phenomenon of the bag filter exists. It has been said that the
condensation phenomenon of the bag filter greatly affects the dust
removal efficiency and stability of the dust collector. Therefore,
we first need to determine whether the condensation in the filter
bag is issued to ensure that the filter bag avoids blockage and
corrosion. |
| 2. After confirming the working indexes of the bag filter,
carefully measure the air volume and the pressure of each test
point during the dust removal operation to ensure consistency with
the initial design. |
| 3. When installing the filter bag, we determine whether there is
any bag drop, loose mouth and wear, etc. In particular, we must
make a preliminary prediction of the smoke emission after starting
the operation to ensure that the bag filter is in the normal range.
Inside. |
| 4. For the direction of rotation of the fan, we need extra
attention. |
| 5. The other two indicators, including the cleaning cycle and the
cleaning time, need to be adjusted in order to ensure the orderly
and stable operation of the work, because the cleaning cycle is too
short or the cleaning time is too long. It is not conducive to the
dust removal work of the bag filter and affects the dust removal
effect. Therefore, it is necessary to add a trial operation phase
before the bag dust collector is put into operation, and only in
this way can the smooth and stable operation of the dust collector
be ensured. |
Work site:
