FDF4A10 Dehumidifier Refrigeration Solenoid Valve 1/4'' 6.35mm OD
AC220V Normally Closed
The FDF4A10 series solenoid valve is a pilot normally closed type,
and the solenoid valve is mainly used for refrigerant control of
refrigeration, air conditioning and heat pump systems. Features are
small size, low power consumption and high reliability. Applicable
refrigerant: R22, R134a, R407C, R404A, R410A, etc. The medium
temperature is between -30 ° C to +120 ° C. The ambient temperature
is between -30 ° C to +50 ° C. The relative humidity is below 95%.
The installation position is in the liquid pipe, the suction and
exhaust port, the coil is upward, and the vertical horizontal
deviation of the coil axis is ±15°, and the flow direction is as
indicated by the arrow.
Technical parameters of FDF4A10 Dehumidifier Refrigeration Solenoid
Valve:
| Model | Actuation | Normal position | Orifice size (mm) | CV | Endoleak (ml/min) 2.1MPa | Operating pressure difference (MPa) | Tube OD (mm) |
| Max | Ｍin |
| FDF2A94 | Direct | NC | Ф1.9 | 0.09 | ≦300 | 3.4 | 0 | Ф6,Ф6.35 |
| FDF4A10 | Pilot | Ф4 | 0.35 | ≦500 | 3.4 | 0.01 | Ф6,Ф6.35 |
| FDF6A58 | Ф5.8 | 0.65 | ≦500 | 3.4 | 0.01 | Ф8 |
General specifications of SANHUA Type FDF NC Series Refrigeration
Solenoid Valve:
| Series | FDF solenoid valve |
| Applicable refrigerant | R22, R407C, R410A, etc |
| Applicable medium temperature | -30ºC (-22°F) ~ +120ºC (248°F) |
| Applicable ambient temperature | -30ºC (-22°F) ~ +50ºC (122°F) |
| Maximum working pressure | 4.5MPa (45 Bar) |
| Relative humidity | below 95% |
| Normal voltage | AC220V, AC110V, DC24V |
| Application | Dehumidifier, refrigerating and freezing systems, air conditioners
and heat pumps |
Main dimension of FDF4A10 NC 1/4'' 6.35mm Refrigeration Solenoid
Valve:
Details enlargement of Normally Closed Sanhua Type Refrigeration
Solenoid Valve:
Other FDF series NC refrigeration solenoid valve for you to choose:
More display of FDF4A10 NC solenoid valve in below Youtube Video:
Precautions of FDF4A10 series pilot normally closed type solenoid
valve:
1) For the matching characteristics of the system, please confirm
the test first.
2) For air conditioners equipped with solenoid valves, be sure to
install a filter of 100 mesh or more before and after the valve.
3) When assembling the welding piping, be sure to ensure that the
valve body temperature does not exceed 120 °C.
4) Keep the valve dry and clean during installation.
5) Solenoid valve body and coil must be used together.
6) After the coil and the valve body are assembled, they need to be
snapped into place.
7) Before using the product, please confirm whether the model,
voltage, etc. meet the system matching requirements, and avoid the
failure of the coil to burn due to the wrong use.
8) The instruction manual is included in the product package. If
you have any questions, please contact the sales staff.
Welcome to your any question and inquiry!
