Product name: Battery Explosion Proof Test Chamber
Model number: GX-FB-200
Equipment description
The battery explosion-proof box is mainly used for over-charging
and discharging of the battery. In the charge-discharge test, the
battery is placed in an explosion-proof box and externally charged
and discharged tester.
Specifications
Each test box size: 500*500*500mm (length * width * height), a total of two test
boxes;
Material: Outer box: 1.5mm thick cold rolled sheet and treated with baking
finish,
Inner box: SUS#201 stainless steel. Thickness 1.0mm;
Single door, double door, inner box door is made of stainless
steel, and silicone fastening bar is added, and there is a
observation window at front of test chamber;
The door is connected to the box by a strong hinge, and the
explosion-proof cold handle door lock;
The inside of the test box is affixed with Teflon tape to prevent
corrosion, insulation, flame retardant and easy to clean;
With a circular wire hole on the left side of each box, the
diameter is φ 50mm, which is convenient for testing the connection
line feed through; (the number and direction of test holes can be
specified)
Each layer has a separate test panel to control the exhaust in each
test chamber, and the exhaust fan in the box can be opened to
exhaust smoke during the test;
Each side of the box is equipped with an exhaust fan (φ 120mm) and
an exhaust duct, which can be connected to the laboratory powerful
exhaust fan;
Each layer of the cabinet is equipped with a lighting device to
facilitate observation of the sample.
There is a thermal insulation design between each layer to avoid
mutual influence testing.
Equipment volume: 700*600*1350mm (length * width * height)
