Customized Length Mode Conditioning Patch Cord Cable LC SC FC ST Mix Singlemode/ Multimode

Mode conditioning patch cord is a duplex multimode cord that has a small length of single-mode fiber at the start of the transmission length. The basic principle behind the cord is that you launch your laser into the small section of single-mode fiber, then the other end of the single-mode fiber is coupled to multimode section of the cable with the core offset from the center of the multimode fiber.

This offset point creates a launch that is similar to typical multimode LED launches. By using an offset between the single-mode fiber and the multimode fiber, mode conditioning patch cords eliminate DMD and the resulting multiple signals allowing use of 1000BASE-LX over existing multimode fiber cable systems. Therefore, these mode conditioning patch cords allow customers an upgrade of their hardware technology without the costly upgrade of their fiber plant. Mode conditioning cables are duplex type, in the middle of the cable it is the key part, usually the 3 connectors of the duplex mode conditioning patch cord are multimode types, and the 4th connector is single mode

Applications:

• Long Haul to Short Haul LX Gigabit Systems
• Recommended for Multimode cable runs greater than 50 feet
• Gigabit Ethernet 1000Base-LX (1300nm wavelength)

Features:

• Eliminates issues related to Differential Mode Delay (DMD)
• Compliant with IEEE 802.3z
• Rugged Offset Closure with Consistent Offset
• Low Insertion Loss (<0.4dB)
• Available with 62.5/125µm OM1 and 50/125µm OM2 multimode cable
• 

Unifiber, a Hi-Tech company specialized in developing and manufacturing optical fiber products. Based on strong hardware development, we are offering the most cost-effective cabling solutions on optical networking, data center, FTTx and OEM solution.

Our featured products includes FTTA Waterproof Connectors, indoor/outdoor armored cable assembly, Pre-terminated Multifiber Cables, FTTH flat drop patch cable, LC Uniboot, 6~12 fiber pigtails and MTP/MPO series. We can also provide adapter, attenuator, fused coupler, PLC Splitter, WDM and various of patch panel, terminal box, ODF and tool series products..

Providing the highest quality products and services is always the most important principle to Unifiber, All our products are subjected to strict test according to BELLCORE standard and fully RoHS compliant. Through the efforts of our team, Unifiber has obtained a widespread acknowledgement, Our products continue to enjoy growing acceptance both in China and abroad.