PU sandwich panel continuous production line 0.4-0.8mm material
thickness
PU sandwich panel line is an automatic production line,which is
consisting of decoiler,film coating,pre-cutting equipment,roll
forming machine system,preheating,foaming,solidification,band saw
cuttinig,cooling,stacking and packiang.The whole line integtates
technologies of mechanics,chemistry,eletrical control,hydraulic
pressure pneumatic and temperature control.
Features
1. Beautiful and applicable,multiple functions,such as thermal
isolation,sound isolation and flame retardence.
2. Using heated air recycle oven,strictly control the temperature
of PU foaming and solidification in suitable range.
3. Using high pressure foaming system,precise measurement,high
stabilith,little dust in locale,protect the worker's health.
4. Using 141B Or C5 as foaming agent.Insted of carbon
chloral-fluoride,make the PU foaming treatment treatment become
environmental production crafe.
5. Special double belt cojveyor,flat surface of sandwich panel,even
thinckness,anti-patter n.
6. Operation system controlled by PLC computer,personal design and
simple operation.
Plate type figure
Technical parameter
| Item | Parameter |
| Material | Type | Color steel sheet;galvanized sheet;Aluminum sheet |
| Thinckness(mm) | 0.4-0.8 |
| Width(Mpa) | ≤1250 |
| Suitable size of panel | Length(mm) | 2000-16000 |
| Width(mm) | 600-1200 |
| Thickness((mm) | 30-200(Not including height of corrugation) |
| Production speed(m/min) | (Adjustable)3-8 |
| Valid length of double belt conveyor(mm) | 16000-36000 |
| Work pressure on pouring foam(Bar) | 150-200 |
| Total power(kw) | Abouot 300 |
| Total size(Length×Width×Height) | 130000×15000×6000 |
