SF-280S-1200mm Steam Heating Single Facer Machine
NO | Name | QTY | |
1
| SF-280S Single facer
|
1 | adsorption Corrugated roller: 48CrMo alloy steel Pressure roller: made in Wuxi Gluing roller and doctor glue roller: Jiangsu Haili makes Gear grinding Manually adjust the coating glue thickness Glue width motor: Taiwan Corrugated roller pressure roller bearing: NSK Doctor glue plate is copper plate Frequency converter Taiwan Delta production Water valve for inverted bucket type, Shanghai brand.
|
Technical specification:
Working width: Max 1200mm Min 600mm
Max machine speed: 120m/min Economic speed:70-80m/min
Working pressure: 0.6-0.9Mpa Steam pressure: 0.9-1.3Mpa
Steam consumption: 0.5-0.8t/h Temperature requirements: 160-200℃
Total machine power: 22.5kw Working power: 380V Frequency :50Hz
Dimension: 2800mm*1900mm*1800mm(L*W*H)
Structure characteristic:
Cardboard transmitting method adopts wind absorption, and keep
flute profiles stable under the running condition of high speed.
By wind machine through vacuum box corrugated paper absorbs to
corrugated roller 180 degrees in the formation of negative pressure
zone,to complete the rolling of corrugated.
The width of wind groove of lower roller is not exceeding 2.0mm,and
will less stripe marks of single corrugated paperboard.
Transmission part adopt gimbal transmission, away from vibration
source, and make the transmission more steady and reliable, and
easy to maintain.
The speed reducing box is oil-lubricating, close gear transmission,
and will reduce machine vibration.
Adopted automatic circulation supply glue,pneumatic glue and
reset,It has a buffering effect.
Upper corrugated roller surface are treated by special mesh snicked
and chrome plated.
Upper-lower corrugated roller are made of high quality 48CrMo alloy
steel, and after heat-treatment, the rigidity is HRC 55-60.The
surface are grinded and plated chrome.
Flute profiles: A flute height:4.7mm C flute height:3.75mm B flute
height : 2.75mm E flute heigh1.8mm(the flute profiles can be made
according to client’s requirements)
Main part technical:
Upper corrugated roller: ￠278mm Lower corrugated roller: ￠280mm
Origin: Wuxi
Pressure roller: ￠292mm 45#seamless steel pipe with quenching
treatment
Applicator glue roller: ￠230mm, surface are treated by special mesh
netting and chrome plated
45# seamless steel pipe Made in Chengdu
Doctor glue roller: ￠120mm 20# seamless steel pipe Made in Chengdu
Pre-heating roller : ￠265mm 20G steel from Jinan Steel
Wall thickness:20mm
Raw materials and purchased standard parts:
Wall plate two sides and seat materials: HT200 Origin : Hebei
Rotary joints, metal soft tube steam Quanzhou Yuquan products
Common bearing: Wa, Ha, Luo Bearing with seat: Jin run Zhejiang
Motor: Main motor: 15KW 1set Continuous working
Wind absorption machine: 7.5KW 1 set Continuous working
Electrical appliances: Made by Schneider, Omron
Pneumatic parts: Airtac, Origin : Taiwan
Main Parts Brand and Materials:
| Mainly Purchased Parts | Raw Materials and Origin |
| Corrugated Roller | Alloy Steel 48CrMo/Chinese Haili |
| Motor | Taiwan Taida |
| Driven Engine | China |
| Pressure Roller | China |
| Gluing Roller | China |
| Frequency Converter | Taiwan Taida |
| Bearing | Japan NSK |
