WJ300-2500 5 ply corrugated cardboard production line Main technical parameter and requirements |
Model No.: WJ300-2500 5 ply corrugated cardboard production line
1, Design speed:300m/min
2, Working width:2500mm
3, Production line size:
Note: The testing paper should as per below request when tested the
production line
Reel–paper grade not less than B.
The moisture rate of reel paper:11%±1%
Face paper: 125-180g/m2
Core Paper: 90-125g/m2
Liner Paper: 90-150g/m2
Corrugated paper: 90-125g/m2
According to the customer request can be choose as below:
Voltage: 380V 50Hz three-phase four-wire system(or as per clients
country standard)
Equipment direction: Left or right transmission will be according
to customer’s request.
Steam consumption: about 4000kg/h
Note: Customer’s self provide parts |
1,Compressor main air pipeline and glue main pipeline
2,Electrical power supply, the wires for link to operate box and
circuitry pipeline
3,Water source, water feeding pipeline and barrel
4,Groundsill plane installation project for water, electricity and
air
5,For testing machines material, such as paper, corn starch,
caustic soda and borax
6,The engine oil, lubricate oil, hydraulic oil, grease and high
temperature lubricating
grease for equipment.
7,The food, hotel for technicians of installation and test. And
provide some workers to
assist in installation
8,Seller need to arrange at least 5 engineer to installation the
machines. But Buyer need to
cooperate with our engineer
9,Buyer need to prepare the boiler 4 tons, The steam pressure is
1.25Mpa
10,Air compressor
