FULLAXS Waterproof Fiber Optical FTTA High Quality FullAXS to LC
Duplex Jumper Patch Cord
The FullAXS connector system meets this requirement by allowing for
a large Z-direction tolerance while also offering the benefit of
one-hand installation of the connector shell. With this new product
offering, users can also conveniently remove and replace
transceivers through a cutout in the bulkhead that completely
eliminates the need to open the entire remote radio box and expose its
contents to hazardous weather conditions. For the optical
connection, the connector system includes an industry-standard
duplex LC interface for fast mating with all LC duplex SFP
transceivers. The FullAXS connector can be designed for either
single mode or multimode optical transmission applications.
Feature:
1).Low Insertion loss
2).High return loss
3).Good Repeatability
4).Good Interchange
5).Excellent Environmental Adaptability
6).Positive mechanical feedback to inform the operator when the
connector is fully mated
7).No cable buckling during or after installation
8).Robust bayonet locking for easy, fast and secure mating
9).A water-proof, dust-proof and corrosion-resistant design that
utilizes metal die cast bulkhead
10).Cost savings through the elimination of fiber management in the
radio unit
Application:
1).Communication rooms
2).FTTH (Fiber to The Home)
3).LAN (Local Area Network)
4).FOS (fiber optic sensor)
5).Fiber Optic Communication System
6).Optical fiber connected and transmitted equipment
7).Defense combat readiness
Optical Fiber Patch Cord Characteristics
1 Connector type: FC, SC, LC, ST, MTRJ, MU, E2000, MPO, DIN, D4, SMA
2 Ferrule End-face: PC,UPC,APC
3 Core Type: Single-mode (SM: 9/125um):G652D,G657A
Multimode(MM: 50/125um,62.5/125um,OM3 or OM4)
4 Cable Quantity: Simplex, Duplex, 6cores ,12corns, 16cores, 24cores, 36cores,
48cores...
5 Cable Diameter: φ3.0mm,φ2.0mm, φ0.9mm
6 Cable Length: 1, 2, 3 meter or customized
7 Sheath Type: PVC, LSZH , OFNR, OFNP, Plenum ,Armored…
Specification:
| Type | Standard,Master |
| Style | LC,SC,ST,FC.MU,DIN,D4,MPO, SC/APC,FC/APC,LC/APC.MU/APC |
| Fiber | Singlemode/Multimode |
| 50/125, 62.5/125 (Multimode) OM2&OM1 |
| 50/125, 10G (Multimode) OM3 |
| Cable | Simplex, Duplex |
| Φ3.0mm, Φ2.0mm, Φ0.9mm |
| PVC or LSZH |
| Polishing Manner | UPC,SPC,APC (8°& 6°) |
| Insertion Loss | ≤ 0.1dB (For Singlemode Master) |
| ≤ 0.25dB (For Singlemode Standard) |
| ≤ 0.25dB (For Multimode) |
| Tested by JDS |
Return Loss
(Singlemode) | UPC ≥ 50dB |
| SPC ≥ 55dB |
| APC ≥ 60dB (typ.65dB) |
| Tested by JDS RM3750 |
| Repeatability | ±0.1dB |
| Operating temperature | -400C to 850C |
Geometry Requirement
( Singlemode) | Ferrule Endface Radius |
| 7mm ≤ R ≤ 12mm (For APC) |
| 10mm ≤ R ≤ 25mm (For Standard) |
| Apex Offset ≤ 30 μm (For Master) |
| Apex Offset ≤ 50 μm (For Standard) |
| Undercut -50nm ≤ U ≤ 50nm |
| Tested by DORC |
Geometry Requirement
( Singlemode) | Ferrule Endface Radius |
| 7mm ≤ R ≤ 12mm (For APC) |
| 10mm ≤ R ≤ 25mm (For Standard) |
| Apex Offset ≤ 30 μm (For Master) |
| Apex Offset ≤ 50 μm (For Standard) |
| Undercut -50nm ≤ U ≤ 50nm |
| Tested by DORC |
Optical Cable Color
Product list:
| Boot | Connector | Fiber Type | Cable number | Ferrule | Connector |
| 0.9mm | LC | 9/125um SM | Simplex | PC | 1M |
| 2.0mm | FC | 50/125um MM | Duplex | APC | 2M |
| 3.0mm | SC | 62.5/125um MM | Multi-fiber | UPC | 3M4M |
| | ST | OM3 | Ribbon | | 5M |
| | MU | OM4 | | | ......... |
| | D4 | | | | Customized |
| | MTRJ | | | | |
| | MPO | | | | |
| | DIN | | | | |
| | | | | | |
