Laboratory Commercial Steam Generator , Induction Steam Generator Low Noise

Product Discription

LSS Oil Fired Steam Generator

LSS vertical steam power gets vertical pipe structure. There are two lower rings and a special tube between the upper and lower protective tubes to form three combustion gases. Magnification and combustion

For heaters and condensers, the thermal efficiency can be 93% and 100%. The use of steam-water separator and external steam-water separator provides high-quality dry steam, saves fuel, reduces system size and prolongs service life.

1. Easy to maintain:

The inspection door is placed at the bottom for inspection and cleaning of the interior of the oven for easy maintenance.

2. Meets environmental requirements:

High quality and reliable burners allow the fuel to burn completely but greatly reduce harmful emissions from waste. The results of the tests in the respective departments indicate that steam (gas) steam power meets national environmental protection requirements.

3. The evaporation can be increased:

The steam engine can be designed in multiple units (with unlimited quantities) and controlled with a computer. You can add up the overall task. The relevant parts of the steam power (including water treatment, water pump, burner, electronic control box and main valve device) are already in the factory.

4. Installation is complete:

It can be connected to water, electricity and steam pipes on site and save time and effort in installation.

5. Reliable accessories:

Burner support, control box, water treatment and valves, pumps are equipped with national high quality equipment. The support system ensures the safe and reliable operation of the steam power and improves the overall quality of the steam power.

Technical Parameters

Main Technical Reference for Fuel (Gas) Steam Generator
Item Unit			LSS0.05	LSS0.1	LSS0.15	LSS0J2
Rated evaporation		Kg/h	50	100	150	200
Rated Pressure PTEPREppoPressure		MPa	0.4/0.7
Rated steam temperature		c	151/171
Rated feed water temperature		°C	20
Evaporator efficiency		/	>92%
Applicable Fuel		/	Gas light oil
Theoretical fuel consumption	Gas	NM3/h	4	8	12	16
	Light Oil	Kg/h	3.3	6.5	9.8	13
Gas supply pressure		mbar	60- 100
water volume		L	<30

Note: The fuel consumption in the table is based on the low calorific value of biomass particles 17084 KJ/Kg (4085 Kcal/Kg).Calculations show that if the low calorific value of biomass fuel is higher than that, the corresponding fuel consumption will be more economical than the values in the table.

Configuration and Interface Size of Fuel (Gas) Steam Generator
Item Unit			LSS0.05	LSSO.l	LSS0.15	LSS0.2
Outward Size of Main Engine (length * width * height)	/	mm	620*620*830	690*690*968	750*750*1130	800*800*1286
Transport Dimension	/	mm	206	252	303	350
Mainframe Transport Weight	DN	mm	G 1/2-	Gl'	Gl"	G 1*
Main Steam Valve Pipe Diameter	DN	mm	Gl/2"	Gl/2-	Gl/2-	Gl/2°
Feed Water Valve	DN	mm	G1 1/4”	G11/4-	G11/4-	G11/4-
Safety Valve Diameter	DN	mm	Gf	GF	Gl"	Gl"
Drain Valve Pipe Diameter	DN	mm	133	133	159	159

Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.

     It is one of the ten most famous towns in Zhongzhou, which is adjacent to National Highway 107 in the South and Beijing-Guangzhou Railway in the north. The company has the B-class boiler manufacturing license issued by the General Administration of Inspection and Quarantine of the State Quality Supervision Bureau and the D1 and D2-class pressure vessel manufacturing license. It is a comprehensive manufacturer of steam boilers, hot water boilers, heat carrier boilers, pressure vessels of Class I and II and auxiliary machines for various boilers. The company was founded in 1987.

     After relocation and expansion, it now has perfect production equipment and testing means, a high-quality staff and technical team, and has established and improved a set of quality assurance system. The quality policy of "quality-oriented, safety first, energy-saving, environmental protection, refinement" and "the pass rate of main parts inspection is over 95%, the pass rate of welding seam inspection is over 98%, the pass rate of product inspection is 100%, the pass rate of products manufactured is 100%, and the implementation rate of regulations and standards is 100%" have been formulated.

Product quality is safe and reliable, environmental protection and energy saving, and conforms to the national standards and industry standards. Pressure vessel products are inspected by the quality and technical supervision department and issued with product inspection certificate. 

Xinxiang Xinguo Container Manufacturing Co., Ltd. is willing to cooperate sincerely with friends from all walks of life to create brilliance!