Motor Direct Driven Floor Grinding And Polishing Machine with
0-1800rpm Variable Speed
HW-G5, 220V and 380V are both available, square plates with 4 heads
which can hold 12 pcs of pads. Grinding width is 600mm, it is the
middle size among the square plate series.
The motor power can be 100% transmitted since the front fuselage is
connected to gear box directly. So the work efficiency has improved
a lot.
Application:
For grinding and polishing concrete, marble, terrazzo, granite,
epoxy, stone floors.
Preparing concrete surfaces for epoxy coatings.
Removing painting, coating, epoxy and glue.
Parameters:
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 27.0A | 15.6A |
| Power Output | 10hp(7.5KW) | 10hp(7.5KW) |
| Inverter power | 10hp(7.5KW) | 10hp(7.5KW) |
| Motor speed | 300-1800rpm | 300-1800rpm |
| Grinding width | 600mm | 600mm |
| Disc Dianeter | 320mm*4plate | 320mm*4plate |
| N.W | 265KG | 265KG |
| Water Tank | 30L | 30L |
| Dimension | 930*600*950mm | 930*600*950mm |
Features
High strength aluminum alloy (gear box, solid, strong, good for
heat radiation).
Water tank for wet grinding, vacuum cleaner for dry grinding.
The plates are cross running, it is easy and comfortable to operate
the machine.
Additional iron weight is real 30kg.
Closer Look
Production Flow
Company introduction
Changsha Honway Machinery Co., Ltd is the professional manufacturer
for floor scarifying & grinding & polishing machine in China. We
are located in Changsha city which is well known as the capital of
construction machinery in China. This city has the abundant supply
of machinery engineers, workers, technique, workcraft, etc. Our
company develops here and builds up as a manufacturing the machines
for ‘Concrete Superflat floor’.
After Sell Service
- One year of warranty for machine.
- We always supply the consumables.
- We always supply the spare parts for all the old models.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- The CD and operation manual is sent with machine to guide the
installation process works and repair problems.
- All machines are tested, and the testing record will be kept,
before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
FAQ
Q: Where is your factory?
A: It is located in Changsha, Hunan province. Welcome you come to our
factory and produce process at any time.
Q: What kind of machine you supply?
A: Concrete grinding machine, concrete scarifying machine, diamond
tools.
Q: What voltage of your machine?
A: 380V three phase,220V three phase and 220V single phase.
Q: What certificates of your machine?
A: 3C CE SGS
