Automatic Control Panel Stabilize Cost Turgo Turbine Hydro Generator With CE TUV ISO9001 Certified

Automatic Control Panel Stabilize Cost Turgo Turbine Hydro Generator With CE TUV ISO9001 Certified

Product Features

The runner blades of the flow turbine are at a certain angle to the axis of the unit, generally at an angle of 15° to 60°. The blades rotate in conjunction with changes in the opening of the vanes, so they are more efficient over a wider operating range. Since the number of runner blades is between the axial flow turbine and the Francis turbine, the application head is also between the two units. It is widely used in power plants with large changes in water head and severe changes in flow rate. It is especially suitable as a reversible unit for pumped storage power stations.

In order to use water resources more effectively, the economics and reliability of power grid supply are improved. Pumped storage power stations have received extensive attention and are developing very rapidly. In recent years, China has also attached great importance to the construction of pumped storage power stations; especially with the construction of atomic power stations and large thermal power stations, pumped storage power stations are more important and indispensable. The diagonal flow pump-turbine has stable running performance and small starting torque; it can be started directly, and it is not necessary to inflate the water into the runner chamber; the reverse thrust is small, so that the phenomenon of lifting the machine during emergency shutdown is better than other units. Particularly suitable for pumped storage power stations.

The components of the crossflow turbine in the prefabricated parts, the water guiding mechanism, the water guiding bearing and the like are basically the same as the corresponding equipment of the Francis turbine. The main difference is in the structure of the runner.

The structure of the diagonal flow turbine runner is shown in Figure 23-1-43. Since the rotor blades are at an angle of 45 to 60 degrees from the axis of the unit, the mechanism for rotating the blades is more complicated than that of the axial-flow rotary turbine. The scraper relay structure is generally adopted in China.

The pressure oil drawn from the oil receiver enters one side of the scraper servo, so that the shaft of the servomotor rotates to drive the operation disc to rotate; the rotor rotates by the rotating arm. In order to adapt to the up and down movement of the oil receiving oil pipe, the rotation of the rotating shaft of the scraper relay drives the cam reversing mechanism to convert the rotation angle of the rotor blade into the vertical movement amount of the operating oil pipe and the oil receiving oil pipe, and the water guiding mechanism Association. Between the blade pivot and the wheel body, the "in" type rubber ring seal is used, and the effect is still good. A good "in" type seal with a life of up to 10 years.

Product pictuers

Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company was founded in 1956. Forster is the first Chinese state-owned enterprise and spares no effort to expand international market in 2013，At present, we have obtained orders in many water-rich areas such as Europe, Asia, South America, North America, etc., and as partners, we are qualified as long-term suppliers in many regions.

The capacity of hydro turbines is up to 50KW-30MW for a unit. The main hydro turbines areTurgo turbine ,pelton turbines, francis turbines, kaplan turbines ,bulb tubular turbines and other types of turbines.Foster also supplies governors, valves, transformers, monitoring systems, microcomputer integrated control panels and other equipment for hydroelectric power plants.

Forster is strict to IEC international standard and national standard. It has CE,ISO,TUV,certificate. The hydro turbines have different types, specifications and reliable quality with characteristics of reasonable structure, reliable operation, high efficiency, standardized parts ,convenient maintenance.

After obtaining the certification of IS09001/2000 quality management system, we still adhere to the rigorous work style formed in the turbine industry for many years, constantly and independently improve and perfect the management system of the enterprise, cherish and value the rich experience accumulated in the turbine production for decades, and constantly increase the technical force and Equipment input, focusing on the production, manufacture and installation of hydro-generator set equipment, auxiliary equipment of power station, production and manufacture of over-current components, repair and Capacity Upgrading of various power plant.

Forster always provides technical advice, services and the best technical solutions to customers based on their parameters. At the same time, it keeps offering after sale service for our product.

We always adhere to the principle of honesty and pragmatism, quality first, will be broad-minded, the attitude of life into our work, and strive to create a win-win situation for customers, enterprises and society. In the fierce market competition, we have always adhered to the details of success or failure, focusing on the achievement of excellence in the spirit of enterprise. In the friendly cooperation with customers at home and abroad, we have been pursuing the business philosophy of creating maximum value for customers.