Main technical parameters and requirements of production line
Model: WJ150-2500 three layer corrugated board production line
| Speed of design | 150m/min |
| economic speed | 120-130m/min |
| work width | 2500mm |
| The size of the production line | about 70m*8.5m*4.5m |
| Note: the production line speed test with the original paper should
meet the following requirements: |
| the grade of the original paper is not less than the B grade | the water content of the original paper is 11% + 1% |
| face paper 120-200g/m2 | core paper 90-125g/m2 |
| liner paper 90-125g/m2 | Corrugated paper 90-150g/m |
| corrugated combination | according to customer requirements A= C= B= E=F |
| power supply | 380V 50Hz three-phase four wire system |
| Total power: 300 kW | common power: 200kw |
| Flow of equipment | determine the transmission left according to the user's factory
building |
| Steam consumption | about 4000kg/h |
Note: customer's own part
1. The main pipe of the compressed air machine and the main pipe of
the glue liquid.
2. The power supply and wire are connected to the operating cabinet
and line pipe.
3, water supply, water supply pipeline, bucket.
4, water, electricity, gas foundation in the plane installation of
civil engineering.
5, test car with raw paper, corn (potato) starch, industrial
caustic soda, borax and other materials.
6, equipment oil, lubricating oil, hydraulic oil, grease and high
temperature grease.
7, install and debug people's diet and accommodation, and provide
the installation workers with the installation.
8, 6 tons steam boiler 1, steam pressure 1.6Mpa.
