Raw materials and bought in parts
* Channel steel of main bridge:# 20 steel Origin: An Steel
* Paper-receiving unit transmitting belt: Nylon industry belt.
* Paper storage unit transmitting belt: Parallel transmitting belt
* Guiding paper engine( conversion control): 4.0 kw 3 set
continuous work Origin Wuxi
* Absorption tension engine: 4.0 kw 3 set continuous work Origin
Wuxi
* Paper width adjustment engine: 0.55 kw 6 sets short time work
*Origin: Hengshui
* Dimension : 48700mm×3930mm×6000mm
* Bearings: Wa, Ha, Luo
* Electric appliances: Zhejiang
Machine Introduction:
1. Adopts suction tension device, use high pressure adsorption
motor to suction the single face paper, make it flat to input the
next process.
2. Installing two operate board, could be adjust on the bridge and
ground.
3. Paper receiving device adopts independent frequency conversion
control, manufacture enough single face paper to wave type, and
make sure enough storage of single face paper, to keep in-phase
different speed in manufacture.
4. With feeding paper frame on the bridge and two conveyor belt to
transport the single face paper to the bridge, forming wave type to
storage the single face paper.
5. The Automatic adjust the position of single face paper, reduce
waste paper ratio of the manual operation.
6. Equipped block part, in order to single face paper stack well on
the bridge when the machine in high speed.
