Model: WJ120-1800 5layer corrugated board production line
1,Design speed:120m/min
2,Economic speed:80-100m/min
3,Working width:1800mm
4,Production line length: about 59 m (the specific length is
subject to the foundation drawing)
P.S.The raw paper in production speed test should meet the
following requirement:
*Raw paper minimum degree : B degree * Percentage of moisture for
raw paper 11% ± 1%
*Face paper 150~200g/m2* *Inner paper 150~200g/m2* *Corrugated
paper 105~180g/m2
5. Flute profiles:A,C,B,E Flute(Or according to the customers`
requirement)
Power supply:380V 50Hz Three phase four wire system
Total power:About 195kw Normal power:About 150 kw
8. Equipment size:60m×8.2m×4.5m(L×W×H)
Equipment flowing direction:According to the user` factory to fix
right or left.
Note: Customer’s self-provided parts
1,Steam system:2000Kg/Hr Steam boiler 1 set Pressure:1.25MPa
Steam pipes above equipment valve and back gas drain pipes.
2,Air compressor ,pipes and glue pipes.
3,Power, wire link to operation box and its pipes.
4,Water source, water feeding pipes and buckets.
5. Water, electricity and air installation on groundwork.
6. Testing material: raw paper, corn (Tuberous crop) starch,
industrial caustic soda, borax and other materials.
7. Motor oil, lube, hydraulic oil and grease lubricant and high
temperature grease lubricant.
8. Board and lodging for installation and commissioning personnel
and arrange workers to cooperate installation.,
Design speed:120m/min | Economic speed :80-100m/min |
No | Name | Qty | Remark |
| 1 | Hydraulic stand | 4 | RS-1500-1800 type, Base paper lifting, clamping loosening, left
shift, right shift are hydraulic control, two brakes, serrated or
expand chuck. The maximum paper width is 1850mm, the maximum paper diameter
1500mm |
| 2 | Railing and pulley | 8 | 8m railing with 8 sets pulley |
| 3 | Single facer | 2 | SF-280S-1800mm. Adsorption,￠280mm Corrugated Rolls is tungsten carbide,motor
frequency conversion control. |
| 4 | Duplex Bridge | 1 | ST-1800 Duplex bridge.Two sets of paper pulling department,
electric correction. Automatically adjust and maintain synchronous adsorption according
to the speed of single facer. |
| 5 | Pre-heater | 2 | MH-600T-1800, diameter of preheating cylinder: ￠600mm, electric
adjust preheating area, trap is Shanghai brand |
| 6 | Pre-conditioner | 2 | MH-600T-1800, diameter of preheating cylinder: ￠600mm, electric
adjust preheating area, trap is Shanghai brand |
| 7 | Triplex pre-heater | 1 | MH-600T-1800, diameter of preheating cylinder: ￠600mm, electric
adjust preheating area, trap is Shanghai brand |
| 8 | Duplex glue machine | 1 | GA-288D-1800, glue roller, ￠288mm, motor frequency control |
| 9 | Double facer | 1 | DF-636-1800, 520mm×16 heating plates, pneumatic tensioning,
hydraulic lifting, speed regulating motor for drive. |
| 10 | Drive unit | 1 | DF-636-1800, drive roller ￠636mm |
| 11 | NC slitter | 1 | SS-150P-1800, five blades and eight lines, lateral movement |
| 12 | NC cutter | 1 | NC-150N-1800, paper cutter shaft, ￠188mm |
| 13 | Paper feeding machine | 1 | Cf-120-1800, four metres in length, with lateral output |
| 14 | Glue Making System | 1 | It contains 1 main tank, 1 carrier tank and 1 glue storage tank, 2
upper tank and 2 lower tank with one side circulation, and 7
pumps.Pipeline provided by customer |
| 15 | Electric System | 1 | Adopt domestic famous brand, including electric wire from control
cabinet to main machine |
| 16 | Steam system | 1 | Float ball water conveyer, pipeline on equipment valve provided by
customer |
