Hydraulic mill roll stand RS-1500H
Machine overview:
The machine is a machine designed to set up and fix the original
paper in the air and provide the original paper for production.
* 2 rolls of paper can be installed at the same time, and the paper
can be changed without stopping.
* the operation of the whole machine is 6 cylinder full hydraulic
control, and the hydraulic control clip arm lifts,
Clamping and opening, left and right:
The clip wall adopts the cast iron curve structure, which is stable
and stable.
* configure the oil pressure system. (Taiwan brand)
* tension control: the use of multi point pneumatic brake, good
brake performance, fast heat dissipation,
A pressure valve, a pressure regulating valve and a pressure gauge
are attached.
The chuck adopts the top - up top design, which does not destroy
the paper core, and the original paper is used more thoroughly.
Specifications:
* the maximum use of paper width 2500mm.
* maximum diameter of the original paper: O 1500mm.
* the minimum diameter of the original paper: O 350mm.
