Product Description:
High Efficiency Special Oil Extraction Equipment Line suits for
extraction of herbal material, such as rose oil, zedoary turmeric
oil, star anise oil, litsea cubeba oil, patchouli oil, peppermint
oil, lavender oil. It is easy for operating and with high oil
extraction rate. It meets for GMP standard.
Application:
1) Pharmaceutical Extractor And Concentrator machine for herb extractor is applicable for plants(like flowers, leafs
,roots and so on) with vacuum or without vacuum .
And it also for the collagen protein, like the pigskin collagen
protein extraciton .(detail pls see the below sheet)
2) Pharmaceutical Extractor And Concentrator machine is used for concentrate the solvent containing water or organic
solvents but dilute low level of suspended solids. Such as
pollution, solvent recovery, wastewater treatment, the concentrated
extract, fruit juice concentrates, etc..
Functions:
1.It adopts the steam distillation tank for waterextraction(wet
steaming), heated by jacket and steam generator.
2.It can completelyeliminate rust taste, and the color difference
technology problems of fragrantessential oil.
3.Please mixing at regular time when the wetsteaming, make the
herbal(such as rose and water fully mixed) and improve thefinished
oil rate.
4.Make the vapor liquid cooling more rapidlyand thoroughly though
the condenser and the cooler.
5.The high precision innersurface makes the oil condensate flow
smoothly. Whole body stainless steel, save area andeasy operation.
Main Technical Data:
| Manufacturer | China LTPM Group Co., LTD |
| PN | 5L vacuum emulsifying mixer |
| Capacity | Design volume: 6L, working capacity:5 L |
| Kettle Cover | Liquid(particle)inlet, sunk material inlet, air inlet with filter,
inspect light and sight glass, vacuum port, pressure meter(1 to
-0.1 bar), pressure clamp |
Mixing pot |
Material | Inner layer: SUS316L thickness: 3mm |
| Middle layer: SUS304 thickness: 2mm |
| Outside layer: SUS304 thickness:2mm |
configuration | Bottom material exhaust, size: 1.5” |
| Temp. sensor (0-199℃) |
| Electrical heating: 2kw, cooling water inlet |
Stirring system |
Homogenizer | 1.Material: SUS316L; standard homogenizer 2. Power: 1.1 kw/380/50Hz; RPM: 0--2800R/Min |
| Stirring scrap and middle stirring | Material: SUS316L,Scrap material: PTFE |
1. Stirring scrap and middle stirring use the same motor 2,Power:0.75 kw/380V/50Hz;RPM:0~86r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite
direction |
| Safety: 1. During stirring, the cover can not open, 2. Cover lift
can not stirring. |
| Vacuum system | 1. Vacuum pump: water recycle, power 0.37kw/380V/50Hz 2. With pressure sensor (during vacuum condition, hydraulic can not
open) |
| Heating method | Jacket electrical heating |
| Exhaust method | Electric doom and bottom discharge or positive pressure discharge
material |
| Pressure | Pressure in the pot during working: -0.090 Mpa; Jacket working
pressure:0.2 Mpa |
| Control box | SUS304 , 1.2mm thickness |
| Dimension | 1400mm×600mm×1900~2400 mm |
| Shelf is SS, platform with raised platform and SS guardrail |
| Spare parts | One year spare parts and tools |
| Guarantee | One year |
| Using life | More than 15 years |
Oil pot | Design volume | 3.35L |
| Working capacity | 2.7L |
| Stirring power | 0.025kw |
| Stirring speed | 1400 RPM |
| Heating power | 1 Kw |
Water pot | Design volume | 3.35L |
| Working capacity | 2.7L |
| Stirring power | 0.025kw |
| Stirring speed | 1400 RPM |
| Heating power | 1 Kw |
