IEC 61034-1 ~2 Smoke Density Electric Optical Cables Testing Equipment 3M x 3M x 3M

IEC 61034-1 ~2 Smoke Density of Electric (optical) Cables Testing Equipment

IEC61034-1~2 Cable Smoke Density Tester

Application:

It is mainly used to measure the smoke concentration of cable and optical cable when burning under certain conditions.

Standard:

IEC 61034-1 ~2

Parameters:

Combustor: Use SUS304 thick 1.5mm stainless steel to fix on square pass bracket, and constitute whole cube combustor.
Combustion chamber dimensions: 3M x 3M x 3M total 27 m3.Can be brick wall structure, also can be steel structure, by customer choice;
Optical measurement system:
Light source: Imported quartz halogen lamp, nominal power: 100W nominal voltage: 12V nominal light return: 2000-3000lm
Receiver: silicon photocell, with light transmittance of 0% and light transmittance of 100%.The spectral response is matched with that of CIE.
Installation: the pipe is installed on one end of the pipe with a length of 150, and the other end is a dustproof window. The inner wall of the pipe is shiny black and anti-reflection.
The light transmittance was 0%, and the light transmittance was 100%.
Standard fire source: Fire source is 1.0l alcohol: 90% ethanol, 4% methanol, 6% water
Alcohol disc (combustion boat) : stainless steel thickness: 1.0mm, bottom: 210x110mm, top: 240x140mm, height: 80mm.

Feature:

This instrument relates to three aspects of mechanical, optical and electronic expertise. It is a mechanical and electrical integration product. It has the advantages of reasonable structure, stable performance and easy operation. WINDOWS XP operation interface, LabVIEW style and perfect security mechanism. During the test of real-time display measurement results and dynamically draw a perfect curve (through the display rate and time curve), the data can be stored permanently, read and print output, can directly print the report.

Measurement software: It is main data of smoke and light density, specific optical density, smoking rate, maximum smoking rate and average smoke density can be tested at WINDOWS XP+VB6.0 operation interface. It also has the operating interface of calibration, editing, testing, parameter adjustment and so on. The program uses computer automatic control, collection, recording and result settlement.

Environmental conditions: