Aluminum Radiator Auto Parts Extrusion Channel Multi Port Tube For
Heat Sink
We have rich experience in aluminum supplying in this industry in
China since we built in 2004. And we also have good reputation in
heat exchange area. We have certificate of TS16949.
Our products are widely used in the field of conduction and heat
dissipation of a series of products, such as new energy vehicles,
lithium batteries, energy storage batteries and son on. We has
worked with well-know international companies to develop relevant
technical solutions and sample or supply.
Our advantage
Since 2004, we have rich experience in this industry in China;
Good reputation in household foil areas;
We start our productions from aluminum ingot,so we can control the
quality as well;
We have our own development department for new material research;
All parts of ladder is self manufacturing, we have price advantage.
Good experience and cooperation with big client in the world;
With Certificate ISO9001-2008;
Sample order is acceptable
High performance cost ratio;
Fast delivery time;
Good communication skills, and good service and understandings for
customers
The micro-channel tube also called The Multi-Port Extrusion (MPE)-
is a highly refined quality product characterized by the following
properties:
Low energy costs
High performance
Low space and weight
High corrosion and pressure resistance
High recycling value
Pressure drop and silent solution
Low refrigerant fill
Our Aluminum Micro Channel Tube can be widely used for heat sink /
transfer.
Like evaporator, air conditioner, condenser, heat exchanger,
freezer, oven gas, boiler and so on.
The material can be 1050/1060/1070/3003/3102 or as customer’s
request.
Temper O-H112,H112,F.
We can do many kinds of sizes, such as 4.0x0.5mm,
6.0x1.0mm,7.0x1.0mm,
7.94x1.0mm,8x1.0mm,9.52x1.0mm,10x1.0mm,12.7x1.2mm,15.88x1.2mm,16.0x1.0mm,
9.05x1.5mm.
FAQ
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples
(within 5 kg),;
after confirmation, 25-30 days for mass production.
Q:OEM/ODM available?
A:Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q:Could you provide sample?
A:Yes, We are honored to offer you samples for quality check.
Q:Is sample order accepted?
A:Yes,we accept sample order and we can provide design service!
| Mechanical property |
| Alloy Code | Temper | Tensile Strength
Rm(Mpa) | Yield Strength
(Mpa) | Elongation(%) |
TR-010,TR-020,TR-030,TR-040,
TR-050,TR-110,TR-310,TR-116,
TR-316,TR-111,TR-313,TR-121,
TR-131,TR-141,TR-150,TR-151,
TR-156Etc. | O | 95-135* | ≥35* | ≥15* |
| H14 | 140-185 | ≥125 | ≥1.5 |
| H24 | 140-185 | ≥125 | ≥3 |
| H16 | 185-225 | 160 | ≥1 |
| H18 | ≥185 | —— | ≥0.5 |
| TR-166Etc. Tube material | H24 | 185-235 | ≥150 | ≥8 |
| TR-116,TR-316 Etc.tube material | H14 | 140-185 | ≥125 | ≥3 |
| H24 | 140-185 | ≥125 | ≥8 |
| Mechanical Properties |
| No | Alloy | Temper | Tensile
strength | Yield
strength | Elongation |
| 1 | 1050 | O/F/H111/H112 | ≥ 65 | ≥ 20 | ≥ 25 |
| 2 | 1100 | O/F/H111/H112 | ≥ 75 | ≥ 20 | ≥ 25 |
| 3 | 1197 | O/F/H111/H112 | ≥ 80 | ≥ 25 | ≥ 20 |
| 4 | 3102 | O/F/H111/H112 | ≥ 75 | ≥ 20 | ≥ 25 |
| 5 | 3R03 | O/F/H111/H112 | ≥ 80 | ≥ 25 | ≥ 20 |
| CHEMICAL COMPOSITION (%) |
|
| Item | Si | Fe | Cu | Mn | Mg | Zn | Cr | Ti | The rest | Al |
| Single | In total |
| Demand (%) | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Allowance |
| / | 0.4 | / | 0.7 | / | 0.1 | 0.05 | 0.4 | / | / | / | 0.3 | / | / | / | 0.1 | / | / | / | / |
|
| Test result | 0.079 | 0.244 | 0.001 | 0.392 | 0.001 | 0.008 | 0.0005 | 0.009 | / | / | Allowance |
|
