Explosion Proof Insertion Fluid Level Meter Ultrasonic Flow Meter
IP65 Protection
Introduction
KUFS2000C insertion type ultrasonic flow meter consists of the
meter and insertion transducer.
Install the transducer by opening two holes on the pipeline.
No need to cutoff water by using the specialized tool.
Transducers are in direct contact with fluid, which make the
measurement more steady and reliable.
If connecting Pt100 temperature transducer, it can realize the
heat/energy measurement.
Working Condition
| Main Unit | Sensor |
| Protection | IP65 | IP68 |
| Humidity | ≤85%RH |
| Temperature | -20~60℃ | -30~160℃ |
Basic Parameters
| Accuracy | ±1% |
| Velocity Range | 0~±10m/s, Bi-directional measurement |
| Pipe Size | DN50~DN6000 |
| Temperature | - 30~160℃ |
| Type of Liquid | Single liquid can transmit sound wave. such as water, sea water, sewage, oil, chemicals , alcohol, etc |
| Pipe Material | Carbon steel, stainless steel 304, stainless steel 316. Flange standard GB/T9119-2000, GB/T81-94 |
| Signal Output | 1 way 4-20mA output(impedance 0~1K, accuracy 0.1%) 1 way OCT pulse output( Pulse width 6 ~ 1000ms) 1 way relay output |
| Signal Input | 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor. |
| Interface | RS485, support MODBUS |
| Data Storage | SD card regularly store the pre-set results (optional) |
| Power Supply | DC8~36V or AC85~264V |
Optional Insertion Sensors
Standard Insertion Sensor
· Suitable for the pipeline can be directly welded, like carbon
steel and stainless.
· Pipeline thickness ≤ 2 0
· Measuring range: DN50~DN6000
· Temperature range:-30~+160℃
Extended Insertion Sensor
·Suitable for the pipeline cannot be directly welded, like cement
pipe, cast iron, PVC, steel or composite material.
·Pipeline thickness ≤ 7 0
·Measuring range: DN50~DN6000
·Temperature range:-30~+160℃
Parallel Insertion Sensor
·Suitable for installation of insufficient space.
·Suitable for either weldable or non-weldable pipeline.
·Unlimited pipeline thickness, insertion depth=1/3 inner diameter.
·Measuring range: DN80~DN6000
·Temperature range: -30~+160℃
Optional Fittings
Pipe Clamp
By using pipe clamp, the insertion sensor can be installed without
welding. There is no need to cut off water during installation.
Especially suitable for cement pipe, cast iron pipe, PVC, copper
pipe or composite material.
