Specification of Aluminum Strip for Transformer
Material: pure aluminum 1060;
Temper: O;
.
Technical Parameters of 1060 Aluminium Strip for Transformer
Thickness: 0.15mm-3.0mm
Width: 20mm-1650mm
Resistivity: ≤0.028
Conductivity: ≥60%IACS
Conductivity is not less than 35.4m/(Ω·mm2)
Introduction of 1060 Aluminum Strip for Transformer
Transformer aluminum strip is the key raw material for the
manufacture of transformer windings, which is the ribbon obtained
by embossing aluminum ingots. Aluminum strip for transformer
(aluminum strip for dry-type transformer) is made of high-quality
pure aluminum. It has high conductivity, soft texture, smooth
surface and no burr. It is an ideal material for producing dry-type
transformers. In the production of aluminum strips for
transformers, the requirement of many technical indexes such as
electrical conductivity of aluminum strip and foil, burr curling,
side bending, and surface quality are very high.
The 1060 transformer aluminum strip produced by Shengzhou Aluminum
Industry have reached and exceeded the national standards in many
technical parameters. The dry type transformer produced by the
aluminum strip has the advantages of small volume, light weight,
good insulation performance, flame retardant, no pollution, partial
discharge, moisture resistance, stable and reliable operation, low
noise and low maintenance cost. Mainly used in high-rise buildings,
underground facilities, commercial centers, residential areas,
hotels and coastal humid areas.
Select Material of Aluminum Strip for Transformer
1060 aluminum strips are generally used for dry-type transformers,
which contains more than 99.6% aluminum, which is a common series
in aluminum plate and strip family. The advantage of using this
series of aluminum strips is that it is a commonly used series, the
production process is simple, the technology is relatively mature,
and the price has a huge price advantage compared to other
high-grade alloy aluminum sheets. Its good elongation and tensile
strength can fully meet the conventional processing requirements
(stamping, stretching) and high formability. 1060 aluminum is
industrial pure aluminum, with high plasticity, corrosion
resistance, electrical conductivity and thermal conductivity, but
the strength is low, heat treatment can not be strengthened,
machinability is not good. It can be gas welded, hydrogen atom
welded and contact welded, and is not easy to braze; it is easy to
withstand various pressure processing and extension and bending.
Packaging of Aluminium Strip for Transformer
Description: The surface is smooth and scratch-free. The side can
be 100% burr-free and better than national standards.
Packing: wooden pallet, inner diameter 300mm or 500mm.
