EETI Series 80H83 / 80H84 Capacitive Touchscreen Controller For
Pcap Touch Panel
GreenTouch capacitive touch
screen EETI solution controller.
Description:
To meet demanding industrial and commercial applications,
GreenTouch capacitive touch
screen EETI solution controller is made by 80H83 or 80H84 chip which
supplied by Thaiwan EETI company, and combined with the feature of
our 12.1”-32” capacitive touch
screen, which constitutes a superior touch solution.
Smooth touch experience:
EETI series capacitive controllers are designed and manufactured
for medium and large size PCAP touch
screens to help improve performance. The EETI series responds quickly and
delivers a seamless touch experience comparable to modern consumer
electronics.
EXC80H83:
Capacitive touch panel has 122 TRX channels.Maximum support to the
industrial control panel 32 inches.The control board is based on
the EETI single-chip IC-EXC8083- built-in 32-bit MCU.Also has a
high-speed CDC module (capacitance to data conversion
module),Supports three-interface mode communication including USB,
I2S, RS232 serial port,An internal boost module for internal
self-calibration,Support for Windows XP/7/8/8.1/10, Android, Linux
and Mac operating systems...Currently mainly used in AIO, POS
machines, industrial equipment and so on.
EXC80H84:
Capacitive touch panel has 122 TRX channels.Built-in EXC80H84
single touch chip, TX channel 64V high voltage drive, high speed
ADC, programmable 12bit.Maximum support to the industrial control
panel 32 inches.The control board is based on the EETI single-chip
IC-EXC8084- built-in 32-bit MCU.Also has a high-speed CDC module
(capacitance to data conversion module),Supports three-interface
mode communication including USB, I2S, RS232 serial port,An
internal boost module for internal self-calibration.Support for
Windows XP/7/8/8.1/10, Android, Linux and Mac operating systems.
Currently mainly used in AIO, POS machines, industrial equipment
and so on.
Difference:
The difference between 80H83 and 80H84 lies in the waterproofness
of 80H83, the general anti-interference, the thickness of the cover
is 6mm, and the thickness of the glove is thin. The 80H84 has high
waterproof performance and strong anti-interference ability. The
thickness of the cover is 10mm and the thickness of the gloves is
thick.
Specification:
| Technical Support | EETI |
| Touch point | 10 points |
| Power Requirements | USB:DC 5V,IIC:DC 3.3V |
| Size | 30mm x 100mm |
| Operating Temperature | -25 to 80 ℃ |
| Storage Temperature | -55 to 150 ℃ |
| Relative Humidity | 95% at 60 ℃, RH Non-condensing |
| Resolution | 16384X9600 |
| Warranty | 1 year |
| Controller interface | USB+IIC+RS232 |
