10% Coblat YG10X Tungsten Carbide Rod Carbide Bar From Dia 0.4mm To
40mm
Material Physical Features
a) Grade: YG10X
b) composition: 10% Co+90% WC
c) Grain Size: 0.6μm
d) Hardness: HRA 89
c) T.R.S.: 2300N/cm2
e) Density: 14.3-14.7g/cm3
Tungsten Carbide Rod Features
- Manufactured with good quality tungsten carbide material
- Dimension: Dia14*100/150/200/330mm length can cut to any size
- Tolerance: Ground (+-0.005mm), blank(+0.3/0.5mm) based on requirement
- Type: solid round bar
- Performance: good wear resistance and toughness, corrosion resistance, high
temperature resistance,stable chemical properties.
- Main application is for making PCB drills, drills,endmills and reamers, wear parts,
and stamping dies, measuring tools.
- Anti-deformation and deflection.
- Produces tungsten carbide rods with extrusion equipment and HIP
sintering furnace
- 100% inspection before shipment which garantee good quality
- Customized: accepted
Application Industries:
- Paper
- packaging
- printing
- Non-ferrous metal processing
- Mechanical
- Chemical
- Petroleum
- Metallurgy
- Electronic
- Defense industries
Our common size models:
Size range(DiaXL mm) | Tolerance |
D(blank, mm) | D (ground, mm) | L(mm) |
Dia(0.4-5)x330 | +0.3/+0.4 | h6/h7 | 0/+2 |
Dia(6-20)x330 | +0.3/+0.6 | h6/h7 | 0/+2 |
Dia(21-40)x330 | +0.5/1.0 | h6/h7 | 0/+3 |
| We are able to help you customized various diameter and length
carbide rod |
Some grade information for Reference
| Grade | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YL10.2 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for
processing cast iron, non-ferrous metal and non-metalloid
materials. |
| YG6 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
| YG8 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG11 | 14.4 | 87.5 | 2260 | Medium grain, for wear parts and mining tools |
| YG15 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YS2T | 14.45 | 92.5 | 2800 | Fine carbide,high wear resistance,high bending strength,high
resistance to bonding, high thermal strength.Machining of
refractory alloys, stainless steel and high manganese steel
etc.Mainly used for disc cutter and other tools |
| YNi8 | 14.6 | 88.5 | 1710 | This grade with 8% nickel binder, it has good wear resistance&
corrosion resistance performance ,especially used for high pressure
environmental , also good for cutting the titanium alloy. |
Our advantage of tungsten carbide rod
* ISO 9001:2015 Certification
* Use 100% tungsten carbide raw material
* Advanced technology , automatic pressing , HIP sintering
* with over ten year experience
* And precision grinding
* the tolerance of polish and ground can be +0.005/-0.005mm
* Full ability to accept OEM & ODM orders
* Stringent quality control and quality consistency.
* Strict inspection for quality of raw material and finished
products
