Good Anti-vibration Tungsten Carbide Rod Blanks, Boring Bar With
Inner Screw
Application of Tungsten Carbide Rod, boring bar
Tungsten carbide anti-vibration cutter holder is an important tool
for machining in CNC machining. Its main function is to avoid
vibration of cutter tools in maximum. Especially as the CNC
precision machining developing,the traditional CNC machining from
5000 rpm,6000 to 8000 rpm,after more sophisticated and efficient
cutting speed will be developed to more than 20,000 turn. It need
higher anseismatic performance to the holder under such high-speed
cutting. So the tugnsten carbide holder must be uniform material,
good seismic and Precision concentric. All this can achieve such a
high speed cutting operation requirements.This kind holder can
greatly extend the cutter lifetime.
| Tungsten Carbide Seismic Boring Bar |
| Diamater:8mm~32mm Length:80mm~450mm |
| |
| Various: PPH/BAP3.4/EMR etc. |
| CNC Boring Bar of precision CNC machining |
| |
Main Features of tungsten carbide boring bar
1. High hardness, High rigidity and extra vibration resistance,
most suitable for extra depth boring
2. Standard internal coolant hole is built in every size of the bar
best for cooling and chip evacuation in deep hole boring.
3. Featuring straight shank structure, the bar can be adjusted to
different working lengths.
4. Internal Thread which make it convenient for changing cutter
based on different machining.
Size list for your reference
For more size, please kindly contact us. we are able to custom-made
according to drawings.
Our general tungsten carbide rod blanks are available in a wide
selection of micro-grain and sub-micron grades that are engineered
to stand up to thermal extremes, vibration, and impact wear
resistance.
Our products are sinter-HIP processed for ISO 9001:2015 certified
manufacturing facilities.
We offer:
- pressed and extruded unground, ground and polished rods with or
without chamfers
- rod products that can be ground to h6 tolerances
- carbide rod with one or two parallel holes
- a variety of grades that provide exceptional wear and impact
resistance
- grades for use in end mills, reamers, drills, countersinks,
engraving tools, routers, and other rotary tools
- grades for use in a broad range of applications in almost any
material
- grade for stamping /colding/ forging dies
Solid Rods and Rods with Coolant Hole
We manufactures 12” (330mm) length rods with single hole, straight
two-hole in diameters from 0.3mm to 33mm. High-performance gun
drill rod blanks are available.
Cut-to-Length Rod
We have one of the largest and most complete lines of ground CTL
selections. Premium grades, standard and micro-finished surface
finish, and h6 ISO diameter tolerances in inch and metric lengths
and diameters. Special preform features are available, including
male center, female center, ballnose, step reduction, and shaped
points.
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Our Advantage:
1. The ideal grade for every application
Our wide and innovative grade range satisfies the exacting demands
of the modern precision tooling industry. You can find the ideal
grade specific to all materials and applications. Some extra-tough
carbide grades perfectly suit for machining under difficult
conditions are now available.
2. Acknowledged quality
Our solid carbide rods are known throughout the world for
constantly providing high quality. You can rely on our products as
a basis for consistent performance capacity of your tools.
3. Extensive product available in stock
Our programme offers you a wide range of dimensions, features and
capabilities. Additionally, we will provide you with swift supply
of the ideal product for your individual application.
Application of tungsten carbide rod
1. Used for making various kinds of carbide solid tools and cutting
tools, such as drills, end mills, thread taps, rotating file,etc. A
good material for general-purpose. Suitable for machining carbon
steel, cast irons, stainless steel, heat-resistance steel, nickel
based alloys and titanium alloys.
2. Wear Parts
3. Wire Guiding
4. Stamping/heading dies
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy
steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.6-0.8 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for PCB
micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| ZF06X | | 92 | Co-6% TaC-2% | 0.6 | 14.8 | 91 | 1300 | suitabble for cutting tools |
| YG8 | K30 | 92 | 8 | 1.2 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG6 | K20 | 94 | 6 | 1.2 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
For more detail size,pls email us,thanks
