Professional Ceramic Sintering Furnace Temperature Control Mode 3 Zone Maximum Load 1800Kg

Professional Ceramic Sintering Furnace Temperature Control Mode 3 Zone Maximum Load 1800Kg

Description:

The ceramic sintering furnace is single-chamber, horizontal and periodic heating. It adopt low voltage and large current graphite heating element to heating, and it has multiple heating units, each unit controls the temperature separately. The whole process is automatically controlled, monitored, tracked and displayed and recorded by the computer.

It including control system, heating system, vacuum system ,cooling water system, rapid cooling system, auxiliary system and safety system.

It adopt the structure of built-in graphite liner in insulation

tube. In general, it meets the strict requirements of temperature uniformity and atmosphere uniformity in the sintering process of high-performance materials. The furnace structure design is advanced and reasonable, and it is easy to use and maintain.

Vacuum pump: backing pump,Roots-type pump(slide valve pump, rotary vane pump, screw pump and so on can be selected for the backing pump, allowing customers to choose world-class brand products)

Power supply: General standard is three phase five wire system AC380V±10% 50HZ.

Control power supply:Single-phase AC210V-250V 50HZ design(Different countries and regions can be designed according to local grid standards)

Temperature measurement mode ;:WRe5-26 thermocouple

Technical parameters:

Applications: For Non-metal ceramic, Precision Ceramic, Life ceramics, Industrial ceramics, Sic carbide

Experience Advantages

1. We have been engaged in designing and manufacturing furnaces for more than 15 years.

2. Commissioning experience of hundreds of gas pressure sintering furnaces.

3. We have a professional team that is capable of completing installation and commissioning within 25 days if water, electric and gas are ensured.

After-sales service

1. We provide technical support and professional solutions according to your production process.

2. We will be responsible for the liability related to intellectual property rights arising from or in connection with the design, manufacturing, sales and operation of the vacuum-pressure sintering furnace. Customers will not be responsible for such liability.

3. We offer 12-month warranty for this gas pressure sintering furnace. If equipment failure happens, our after-seals personnel will respond within 24 hour after being notified, and if on-site assistance is required, our personnel will arrive at the site within 48 hours. They will check and repair the equipment until it works normal again.

4. If any loss or damage arises during the warranty period from equipment quality, we will offer free replacement or repair. If it’s not due to quality, or it’s caused by customer’s negligence or improper operation, customer can contact us for paid technical assistance.

       Zhuzhou Ruideer Intelligent Equipment Co., Ltd. is a manufacturer of powder metallurgy solutions for the whole industry chain. It integrates process development, production, sales and coating services of sintering furnace, PVD coating furnace and CVD coating furnace. Ruideer has standardized workshops and office buildings, covering an area of more than 19,000 square meters, with more than 170 employees. Ruideer’s productivity reaches 120 sets of pressurized sintering furnaces per year, 500,000 pieces of PVD coating per month, and 250,000 pieces of CVD coating per month.

In the past years, Ruideer has been rated as a national high-tech enterprise, a national-level Specialized and Sophisticated enterprise (appointed as a national key little giant enterprise in 2022), a little giant enterprise in Hunan Province, and a single champion of pressure sintering furnace in Hunan Province, and gained 85 intellectual property authorizations.

Nearly 400 sets of degreasing gas pressure sintering furnaces and 180 sets of degreasing vacuum pressure sintering furnaces have been produced. In order to continuously meet and exceed customer needs, Ruideer provides customers with "targeted application, key development, and tailor-made" characteristic services. The products are sold both at home and abroad (US, Russia, EU, Japan, Ukraine, South Korea, Vietnam and other countries), providing 24-hour response services to domestic customers. Ruideer's products have been widely used in the cemented carbide, ceramic, MIM stainless steel, semiconductor industry.

In line with the enterprise spirit of "quality-oriented, continuous innovation, service satisfaction, unity and hard work, and common development", Ruideer is guided by market demand and business development, supported by key technologies, closely following customer needs, and is committed to serving customers with stable and reliable technical products and contribute to the application in the field of powder metallurgy!

Our standard sintering furnace model include (but are not limited to):

• Gas pressure sinteing integrated furnace（1MPa/2MPa/6MPa/10MPa)
• Debinding vacuum sintering integrated furnace
• MIM stainless steel sintering furnace
• Silicon nitride sintering furnace
• Silicon carbide sintering furnace
• Metal sintering furnace (Mo/W heater)
• Vacuum brazing furnace
• CVD coating furnace