Customizing Wear Tungsten Carbide Bush / Bearing Bushing / Thrust
Sleeve
The Product Application of tungsten carbide bushing
Tungsten carbide bushing applications is widely, which is a device
to protect a class of components. It is in the actual work and the
role and purpose of its application environment have a great
relationship. Valve applications, bushings be installed in the
valve stem cap trap, in order to reduce the valve leakage, to seal;
bearing applications, the use of bush to reduce wear between the
bearing and the shaft seat, avoid the gap between the shaft and the
hole increases and so on.
Tungsten carbide bushing production and processing of
high-strength, can withstand prolonged load, with high chemical
stability, alkali, alcohol, ether, hydrocarbons, acid, oil,
detergent, water (sea water), and has no smell , non-toxic,
tasteless, non-rust characteristics, its widely used in
petrochemical industry for Submerged Oil Pump, slurry pump, water
pump, Centrifugal Pump,etc.
The Product feature of tungsten carbide bushing
1. High hard resistance
2. High corrosion resistance
3. Pressured resistance
4. Wear resistance
5. High bending strength
Grade List
Grade | Density | T.R.S. MPa | Performance & application recommended |
YG6A | 14.95 | 1800 | Fine grain alloy, good wear resistance. Semi-finishing of chilled
cast iron, non-ferrous metals alloys, semi-finishing and finishing
of hardened steel, alloy steel. |
YG8 | 14.8 | 2200 | High strength in use, impact and shock resistance higher than YG6,
but wear resistance and cutting speed comparatively lower |
YN8 | 14.7 | 2000 | Corrosion Resistant, It widely used in chemical and petroleum pumps |
YG10 | 14.5 | 2400 | High strength in use, impact and shock resistance higher than YG6,
but wear resistance and cutting speed comparatively lower. Roughing
of cast irons, non-ferrous metals and their alloys as well as non
metallic materials at low cutting speed. |
YL10.2 | 14.5 | 2400 | Fine grain alloy, good wear resistance. Used for processing hard
wood, veneer board, PCB, PVC and metals |
YG20 | 14.3 | 2420 | Conventional wear resistance, high bending strength,used for steel
alloy etc. |
Details Carbide Bushing
| Deimensions of A Type Straight Sleeves (mm) |
|
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-556.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-16.0 | 15.0-25.0 |
| Deimensions of A Type Straight Sleeves (mm) |
|
| D | d | C | F | H |
| 38.0-50.0 | 35.0-45.0 | 30.0-35.0 | 20.0-30.0 | 27.0-40.0 |
| 51.0-100.0 | 46.0-95.0 | 35.0-80.0 | 20.0-30.0 | 30.0-50.0 |
Product Application Scene
Production Process
FAQ
Q1: How can I place order?
A1: You can contact us by email about your order details, or place
order on line.
Q2: How can I pay you?
A2: After you confirm our PI, we will request you to pay. T/T (HSBC
bank) and Paypal, Western Union are the most usual ways we are
using.
Q3: What’s the order procedure?
A3: First we discuss order details, production details by email or
TM. Then we issue you an PI for your confirmation. You will be
requested to do pr -epaid full payment or deposit before we go into
production. After we get the deposit, we start to process the
order. We usually need 7-15 days if we don’t have the items in
stock. Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
Q4: How do you take care when your clients received defective
products?
A4: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.
Q5: How do you check all the goods in the production line?
A5: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.
