Blank / Ground High Performance Solid Carbide Rods for Woodworking
Tools
We can supply all kinds of dimensions solid carbide rods with
fine&sub micron grain size, suitable for various application.
We specialized in tungsten carbide round bars with outstanding
production line of solid carbide rod and coolant rod.
We manufactured and stocked unground and ground carbide rods for
you.
Various grade of carbide rod for your choice
| Grade | YL10.2 | YG6 | ZF10 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 90 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 10 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.4 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.8 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92.5-93 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 3800 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and
Toughness, strength comparatively higher,suitable for PCB micro
drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard
wood,processing original wood,aluminum section bar,brass rod and
cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear
resistance,Suitable for processing Chilled cast iron,
heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro
drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron
and light alloys and also for the milling of cast iron and
low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and
punching dies |
Our Various Standard Size List
Dia
mm (blank) | Dia
mm (ground) | L
mm | | Dia
mm (blank) | Dia
mm (ground) | L
mm |
| Ø 2,2 +0,2 | Ø 2,0 h6 | L330+0.5 | Ø 16,2 +0,3 | Ø 16,0 h6 | L330+0.5 |
| Ø 3,2 +0,2 | Ø 3,0 h6 | L330+0.5 | Ø 17,2 +0,3 | Ø 17,0 h6 | L330+0.5 |
| Ø 4,2 +0,2 | Ø 4,0 h6 | L330+0.5 | Ø 18,2 +0,3 | Ø 18,0 h6 | L330+0.5 |
| Ø 5,2 +0,2 | Ø 5,0 h6 | L330+0.5 | Ø 19,2 +0,3 | Ø 19,0 h6 | L330+0.5 |
| Ø 6,2 +0,2 | Ø 6,0 h6 | L330+0.5 | Ø 20,2 +0,3 | Ø 20,0 h6 | L330+0.5 |
| Ø 7,2 +0,2 | Ø 7,0 h6 | L330+0.5 | Ø 21,2 +0,3. | Ø 21,0 h6 | L330+0.5 |
| Ø 8,2 +0,3 | Ø 8,0 h6 | L330+0.5 | Ø 22,2 +0,3 | Ø 22,0 h6 | L330+0.5 |
| Ø 9,2 +0,3 | Ø 9,0 h6 | L330+0.5 | Ø 23,2 +0,3 | Ø 23,0 h6 | L330+0.5 |
| Ø 10,2 +0,3 | Ø 10,0 h6 | L330+0.5 | Ø 24,2 +0,3 | Ø 24,0 h6 | L330+0.5 |
| Ø 11,2 +0,3 | Ø 11,0 h6 | L330+0.5 | Ø 25,7 +0,3 | Ø 25,5 h6 | L330+0.5 |
| Ø 12,2 +0,3 | Ø 12,0 h6 | L330+0.5 | Ø 27,2 +0,3 | Ø 27,0 h6 | L330+0.5 |
| Ø 13,2 +0,3 | Ø 13,0 h6 | L330+0.5 | Ø 29,2 +0,3 | Ø 29,0 h6 | L330+0.5 |
| Ø 14,2 +0,3 | Ø 14,0 h6 | L330+0.5 | Ø 30,2 +0,3 | Ø 30,0 h6 | L330+0.5 |
| Ø 15,2 +0,3 | Ø 15,0 h6 | L330+0.5 | Ø 31,2 +0,3 | Ø 32,0 h6 | L330+0.5 |
We strictly control the Straightness, Circular Run-Out and
Roundness.For more size information, please kindly email or call us.
Solid carbide rod type we can provide:
1. solid carbide rods
2. single central hole rods
3. double parallel hole rods
4. fixed Length carbide rod
5. Random Length Carbide rod
5. chamfered rods
6. other special customized rods
Product Features
Our Solid carbide rod has good straightness, excellent hardness,
and stable toughness.With high wear / corrosion resistance,
suitable for the manufacturing of various kind of solid cemented
carbide tools for the machining of heat-resistant alloy and Ti
alloy,also suitable for the manufacturing of micro drills used for
machining PCB.
-- Dimension: diameter from 3-25mm, length from 38-330mm;
-- with one coolant hole or two coolant holes or without coolant
hole;
-- ground and unground;
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS
2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten
carbide is more uniform,more dense,the TRS can be raised more than
20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Production Process:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Application:
Tungsten carbide rod grades are mostly fine and ultra fine grain
with high performance. It's suitable for processing of non-ferrous
metal, plastic materials, carbon fiber, chilled cast iron and
heat-resistant alloy steel, high-temperature alloy steel, stainless
steel, high manganese steel, etc. It can manufacture of drill bits,
end mills, and reamers. Tungsten carbide bushing widely used in
stamping tools and wear-resistant tools, etc.
Our packing and shipping
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you
request.
