power tools parts tungsten carbide tip for Industrial Parts
Product Features of tungsten carbide tip
ZhenFang tungsten carbide tip, made from 100% virgin raw materials.
It can be used in wide application field. Jintai tungsten carbide
tip, good red hardness,excellent wear-resistance, high elastic
modulus and compressive strength. The chemical properties of our
tungsten carbide tip is stable, also the impact toughness &
dialatation coefficient is low. The heat-conducting property and
electrical conductivity of tungsten carbide tip is close to iron or
iron alloy.
It is a very good material to produce the parts to resist high
temperature & corrosion, also it is widely used as wear parts and
shielding parts. We provide you tungsten carbide tip which can
enhance your productivity and save your cost.
Grade for tungsten carbide tip| ISO | Jintai Grade | Density g/cm3 | Hardness No Less ThanHRA (HV) | TRS No Less Than (Mpa) | Applications recommended |
| K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals
and also for the machining of manganese stell and hardening steel. |
| K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| K20 | YG8 | 14.6 | 89 | 1840 | Suitable for the roughing of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| K05 | YG3 | 15 | 90.5 | 1300 | |
| M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and
conventional alloy steel |
| M20 | YW2 | 13 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and
low-alloy steel and it is mainly used for the maching of railway
wheel hubs. |
| P10 | YT15 | 11.3 | 91 | 1300 | Suitable for the finihing and semi-finishing if steel and cast
steel with a moderate feed rate and a rather high cutting speed. |
| YT14 | 11.5 | 90.5 | 1400 | Suitable for the finishing and semi-finishing of steel and cast
steel. YS25 is specially used for the milling of steel and cast
steel. |
| P30 | YT5 | 13 | 89.5 | 1560 | Suitable for the heavy duty rough tuming of steel and cast steel
with a big feed rate at a medium and low speed under unfavorable
working conditions. |
| P40 | YC40 | 12.9 | 91 | 2200 | Suitable for the heavy duty turning of steel and cast steel with a
big steel with a big steel rate and also for face milling. |
Our Services
1> 24 hours technical support by Email or Calling.
2> Maintenance and technological support: Whole life.
3> Engineers available to service machinery overseas.
4> Free samples for testing
Company Information
1. Jintai company is a manufacture of tungsten carbide product
export carbide products more than 3000 units each year
2. Jintai tungsten carbide products are sold to more than 89
countries aroung the world
3. 17 years experience, and have good reputation
4. $1.4 million registered capital, 1000 square meters of new factory
area
FAQ
Q: How can I choose the most suitable grade?
A: In order to recommend you the most suitable grade, please let us
know the following detailes:
1. What material that will be processed?
Q: What’s price
1. What’s size?
2. What’s tolerance?
3. How many?
