Infrared PIR Motion Sensor Switch ,fission Induction head
Split infrared induction switch
| Main technical parameters working voltage | AC170V-AC250V 50HZ |
| load function | ≤ 200W |
| three-wire induction distance | 5 ≤ 12 meters |
| induction angle | left and right 120 degrees up and down 110 degrees |
| delay time | 30S-90S |
| sensitive range | ≤ 7Lux |
| applicable load | ceiling lamp, incandescent lamp, exhaust fan, energy saving lamp,
fluorescent lamp, second. Install diagram |
Note
1. When installing this switch, please turn off the power supply
and operate;
2. This switch must work only when the light is dim and does not
work during the day;
3. When installing, avoid the place where the strong light shines,
and the distance from the lamp is more than 0.5 meters;
4. This switch is suitable for light bulb, energy saving lamp and
load power ≤ 200W. Short circuit is strictly prohibited, line
connection is wrong or overloaded;
5. The height of the switch should be between 1.2 m and 2 m when
installed as wall type, and between 3 m and 4 m when installed as
suction top type, otherwise the sensitivity of the switch should be
affected.
6. This product adopts the applicable three-wire design wiring
mode, according to the national electrical standard, see the
figure;
7. After the power is connected, the switch is automatically tested
and entered the working state after a few seconds. Under normal
use, the switch is protected for three years. (excluding improper
human use)
How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Use: hallway, corridor, basement, garage, storage, monitoring and other
indoor (outside) energy-saving automatic lighting situations
How to proceed an order ?
Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
About Us
Shenzhen Yuan Fang Hua Technology Co., Ltd. has been committed to
the infrared induction switch products sales since 2011. The
company is located in the shenzhen special economic zone of China,
a borders inland, near Hong Kong, Macao, Taiwan and overseas.
Geographical position advantageous. We have many experienced
engineers and production expert, and it can guarantee the quality
of the products.
We also has bridle-wise manage team ,design team and QC team ,and
can supply customer their desired sample in the earliest date ,
arrange your order correctly, strictly control the mass production
quality and lead time , and let the business goes smoothly !
With our years of experience, advanced technology and continuous
research, our quality is to fully meet the needs of the market to
meet the requirements of customers, many customers use our
products, we believe that the product is very good. Whether it is a
powder, or liquid, quality is always our first to care.
Note:
1. Due to the light and screen difference, the item's color may be
slightly different from the pictures.
2. Please allow slight deviation for the measurement data and make
sure you do not mind before ordering.
