Suction top induction, Round switch, PIRCeiling lamp, New style
Brief Introduction of Product Function
Main technical parameters
working voltage | AC170V-AC250V 50HZ |
load function | ≤ 200W |
four-wire induction distance | 5 ≤ 12 meters |
induction angle | 120 degrees up and down 110 degrees |
delay time | 30s |
suitable load | ceiling lamp, incandescent lamp, exhaust fan, energy saving lamp,
fluorescent lamp |
Install diagram Note
1. When installing this switch, please turn off the power supply
and operate;
2. This switch must work only when the light is dim and does not
work during the day;
3. When installing, avoid the place where the strong light shines,
and the distance from the lamp is more than 0.5 meters;
4. This switch is suitable for light bulb, energy saving lamp and
load power ≤ 200W. Short circuit is strictly prohibited, line
connection is wrong or overloaded;
5. The height of the switch should be between 1.2 m and 2 m when
installed as wall type, and between 3 m and 4 m when installed as
suction top type, otherwise the sensitivity of the switch should be
affected.
6. This product adopts the applicable four-wire design wiring mode,
according to the national electrical standard, see the figure;
7. After the power is connected, the switch is automatically tested
and entered the working state after a few seconds. Under normal
use, the switch is protected for three years. (excluding improper
human use)
Features
The advantages of the intelligent switch are good stability, fast
transmission speed and strong anti-interference ability. The
intelligent switch uses a special signal line alone, and it is not
subject to radiation clutter such as power lines and radios, and
the operation stability of the product is very strong. Stability in
terms of performance will determine the speed and immunity to
interference of the transmitted signal.
The product adopts good sensitivity detector. It gathers
automatism, convenient safe, saving-energy and practical functions.
It is easy to install and used widely.
About Us
Shenzhen Yuan Fang Hua Technology Co., Ltd. has been committed to
the infrared induction switch products sales since 2011. The
company is located in the shenzhen special economic zone of China,
a borders inland, near Hong Kong, Macao, Taiwan and overseas.
Geographical position advantageous. We have many experienced
engineers and production expert, and it can guarantee the quality
of the products.
We also has bridle-wise manage team ,design team and QC team ,and
can supply customer their desired sample in the earliest date ,
arrange your order correctly, strictly control the mass production
quality and lead time , and let the business goes smoothly !
