Product Introduction
Irradiation cross-linked Polypropylene (IXPP) foam is a kind of
high-performance closed cell foaming material which is made of
polypropylene and various fillers, additives and foaming agents
various materail .The production process includes granulation,
extrusion, electron irradiation, cross linking and high temperature
foaming.
Specification
| Ratio B | Width /MM | Thickness /MM | Tensile Strength | Tensile Elongation | Compression Stress /KPa |
| | | crosswise/MPa | lengthwise/MPa | crosswise /% | lengthwise /% | |
| 7B | 100-1000MM | 2~4MM | 250 | 300 | 1.8 | 2.4 | 270 |
| 10B | 100-1000MM | 1.5~4MM | 250 | 300 | 1.4 | 2 | 200 |
| 15B | 100-1200MM | 1.5~4MM | 250 | 250 | 0.9 | 1.4 | 120 |
| 20B | 100-1400MM | 2~6MM | 200 | 250 | 0.6 | 0.9 | 80 |
| 25B | 100-1400MM | 2~6MM | 200 | 200 | 0.5 | 0.6 | 50 |
IXPP Material Benefits
1. 60% less weight than ordinary material
2. Compared with PVC foamed material, the CO index of PP foamed
material was improved by more than 40%.
3. It is suitable for application process with thermal stability up
to 120 ℃.
4. Processing technology, high processing efficiency;
5. Compared with TPO foam, scratch resistance and compression
recovery are better.
About CYG
CYG TEFA Co., Ltd has 17 years of production experience. We're the
biggest and the most professional irradiation cross-linked
polyethylene conductive foam manufacturer in China and has the most
complete cross-linked polyethylene foam products. Our main products
are Cross-linked PE foam material, IXPE foam, XPE foam, Conductive
IXPE foam; ESD foam tray, ESD packing material; Beach mat, camping
mat, sleeping mat, yoga mat; etc. Our clients are iPhone, Samsung,
Gree, Haier, TCL, Adidas, Nike, Flextronics, General Motors, BYD,
PPL, etc. Now, we have 2 factories and 17 production lines...
FQA
1)What's the advantage of your insulation?
Our insulation have good performance on heat-resistant, fireproof,
waterproof, heavy duty, lightweight, Eco-friendly and so on
2)What’s the order procedure?
First we discuss foam products details by email or TM.
Then we issue you a PI for your confirmation. You will be requested
to do prepaid full payment or deposit before we go into production.
After we get the deposit, we start to process the order. usually
takes 7-15days if we don’t have the items in stock.
Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
3) What's the application of insulation?
Our insulation products are widely used on roofing, external wall,
floor, HVAC pipe, transportation and any other places needing
insulation.
Low-density polyethylene foam has numerous applications because of
its many desirable properties including water-resistance, chemical
resistance, energy-absorbance, buoyancy and cushioning
characteristics. Compressive strength is greater in denser foams,
decreasing as density decreases. Low-density foams tend to exhibit
more compressive creep, meaning they become less thick over time,
than higher-density foams.
Production
