TM-30-4/6 Station tube end forming machine (30T type)
| main technical parameter | |
| max suitable tube size | Φ80 |
| Max working stroke | 160mm |
| Hydraulic power | 35Ton |
| station | 4 or 6 |
| Servo Die change speed | 0.05mm |
| working speed | 3-4sec |
| Machine characteristics |
| (1) PLC control, hydraulic drive, stable operation |
| (2) Touch screen control |
| (3) Mobile pedal switch with automatic, tight stop,continue three
consecutive modes |
| (4) Four / six station, servo die changing, high speed and
precision |
| (5) Die replacement is simple and suitable for elastic production |
| (6) Can shrink tube, expand tube, tampering process. |
Advantages:
1. Low cost for operator training,high production effeciency and
product uniformity.
2. Drived by electric servo motors.compared with hydraulic drive,it
has higher stability and longer lifetime.It is unnecessary to worry
about oil-leak or working temperature.
3. Gapless tube bending,with long-time high precision and
processing efficiency,easy for operation.It has good compatibility.
4. Small in size,low noise level
5. Low running cost,with best cost performance for tube processing.
6. Widely used in small-diameter tube processing,for example tubes
of air conditioner and oil tube for autos
Standard models:1~5 stacks,4~6 servo motors
Advanced motor:11 fully electric servo motors
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger
Features
1. The electric control system uses famous Japanese
controllers,such as servo drivers,servo motors,positioning modules
and CPUs manufatured by the Mitsubishi Corporation,and is high in
performance and good stability.
2. The Mitsubishi ultra-large CPU can accommodate 400 groups of
files for compiling,if necessary,the additional transmission
software is bought and installed in the computer,and the documents
and files are stored in the hard disk,so that the number of
compiling groups is unlimitedly expanded.
3. Industrial-use computer type:the WINDOWS operating system is
internally installed,and used together with the Mitsubishi servo
system,besides the Mitsubishi servo driving,the convenient file
management owned by the WINDOWS operating system is also
provided;and the files can be storted in the hard disk or soft
disk,so that the compiling groupnumber is unlimitedly expanded.
4. Automatic 3D simulation function for tube-forming is selected as
required.
5. An automatic error-fault detecting function is provided,and the
errors and faults are displayed on the screen,so that the operator
can much easily troubleshoot.
6. The machine can be connected with a printer so as to print the
data displayed on the screen.
7. Communication interface can be installed as required,which can
be connected to our company.Our engineer will provided remote
service of real-time monitoring,data updating,failure checking and
so on.
8. A feeding cart’s feeding position,safety position,wheel mode
interfering position and guided mode interfering position are
set,so that a hand wheel pulse wave generator can be finely
tuned,the position can be automatically remembered,and the error
caused by the manual measurement and the loss caused by the feeding
cart bumping the machine are eliminated
9. The feeding shaft will perform automatic detection before
acting,so that the feeding shaft is avoided from bumping the
machine
10. When the curves are tested,analytical actions can be used,the
actions are modified by the careful observation of the interference
points ,so that the efficiency is improved.
