CNC65RES Tube bender
machine characteristics | | main technical parameter | |
| (1) Electical servo bending | Max capacity | round tube/iron tube ( S=40kgf/mm ) | 65x2.5t |
| (2) Imported servo motor and reducer | Round tube/non iron metal tube( S=25kgf/mm ) | 65x4.5t |
| (3) ndependent R & D software system | Round tube /stainless steel tube ( S=60kgf/mm ) | 65x1.6t |
| (4) 1-4 layer die optional | Square tube/Metal Tube ( S=40kgf/mm ) | 50x50x2.3t |
| (5) 11 axis full motor type optional | Round bar ( S=40kgf/mm ) | 33 |
Push-bending type, bending radius 7D | Servo bending axis | precision | 0.05 |
RBE strongly back push bending, minimum bending radius is 1D | max speed | 100°/sec |
| Servo material feeding axis | precision | 0.05mm |
| max speed | 1000mm/sec
RBE: 240mm/sec |
| Servo tube rotate axis | precision | 0.05 |
| max speed | 200°/sec |
Advantages:
1. Low cost for operator training,high production effeciency and
product uniformity.
2. Drived by electric servo motors.compared with hydraulic drive,it
has higher stability and longer lifetime.It is unnecessary to worry
about oil-leak or working temperature.
3. Gapless tube bending,with long-time high precision and
processing efficiency,easy for operation.It has good compatibility.
4. Small in size,low noise level
5. Low running cost,with best cost performance for tube processing.
6. Widely used in small-diameter tube processing,for example tubes
of air conditioner and oil tube for autos
Standard models:1~5 stacks,4~6 servo motors
Advanced motor:11 fully electric servo motors
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger
Features
1.The electric control system uses famous Japanese controllers,such
as servo drivers,servo motors,positioning modules and CPUs
manufatured by the Mitsubishi Corporation,and is high in
performance and good stability.
2. The Mitsubishi ultra-large CPU can accommodate 400 groups of
files for compiling,if necessary,the additional transmission
software is bought and installed in the computer,and the documents
and files are stored in the hard disk,so that the number of
compiling groups is unlimitedly expanded.
3. Industrial-use computer type:the WINDOWS operating system is
internally installed,and used together with the Mitsubishi servo
system,besides the Mitsubishi servo driving,the convenient file
management owned by the WINDOWS operating system is also
provided;and the files can be storted in the hard disk or soft
disk,so that the compiling groupnumber is unlimitedly expanded.
4. Based on the change of materials,each curve is set with a
compensation value,a speed and a demoulding gap.
5. Each curve of one tube can be programmed with five action
sequences and ten-stage speeds,so that the processing efficiency is
improved,and the interference point is reduced.
6. Chinese/English language are switched to display on the touch
screen,and customers can also purchase the machine installed with
other languages
7. An automatic oil charging system is installed to reduce friction
of the bending tube.It prolongs the lifetime of the core rod and
improves the quality of the bended tube.
8. The machine can be connected with a printer so as to print the
data displayed on the screen.
9. Communication interface can be installed as required,which can
be connected to our company.Our engineer will provided remote
service of real-time monitoring,data updating,failure checking and
so on.
10. When the curves are tested,analytical actions can be used,the
actions are modified by the careful observation of the interference
points ,so that the efficiency is improved.
