Easy to install flowmeter Ultrasonic pipe flowmeter
Introduction
The KUFM2000 flow meter module has small volume, overall function
and low costThe KUFM2000 flow meter module has small volume,
overall function and low costThe KUFM2000 flow meter module has
small volume, overall function and low cost.
KUF2000 series insertion type ultrasonic flow meter consists of the
meter and insertion transducer. Install the transducer by opening
two holes on the pipeline. No need to cutoff water by using the
specialized tool. Transducers are in direct contact with fluid,
which make the measurement more steady and reliable.
If connecting Pt100 temperature transducer, it can realize the
heat/energy measurement.
Working Condition
| Main Unit | Sensor |
| Protection | IP30 | IP68 |
| Humidity | ≤80%RH |
| Temperature | -20~60℃ | -30~160℃ |
Basic Parameters
| Accuracy | ±1% |
| Velocity Range | 0~±10m/s, Bi-directional measurement |
| Pipe Size | DN50~DN6000 |
| Temperature | - 30~160℃ |
| Type of Liquid | Single liquid can transmit sound wave. such as water, sea water, sewage, oil, chemicals , alcohol, etc |
| Pipe Material | Carbon steel, stainless steel 304, stainless steel 316. Flange standard GB/T9119-2000, GB/T81-94 |
| Signal Output | 1 way 4-20mA output(impedance 0~1K, accuracy 0.1%) 1 way OCT pulse output( Pulse width 6 ~ 1000ms) 1 way relay output |
| Signal Input | 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor. |
| Interface | RS485, support MODBUS |
| Data Storage | SD card regularly store the pre-set results (optional) |
| Power Supply | DC8~36V or AC10~30V |
Optional Insertion Sensors
Standard Insertion Sensor
Suitable for the pipeline can be directly welded, like carbon steel
and stainless.
Pipeline thickness ≤ 2 0
Measuring range: DN50~DN6000
Temperature range:-30~+160℃
Extended Insertion Sensor
Suitable for the pipeline cannot be directly welded, like cement
pipe, cast iron, PVC, steel or composite material.
Pipeline thickness ≤ 7 0
Measuring range: DN50~DN6000
Temperature range:-30~+160℃
Parallel Insertion Sensor
Suitable for installation of insufficient space.
Suitable for either weldable or non-weldable pipeline.
Unlimited pipeline thickness, insertion depth=1/3 inner diameter.
Measuring range: DN80~DN6000
Temperature range: -30~+160℃
Optional Fittings
Pipe Clamp
By using pipe clamp, the insertion sensor can be installed without
welding. There is no need to cut off water during installation.
Especially suitable for cement pipe, cast iron pipe, PVC, copper
pipe or composite material.
Company Information
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof, etc. which assure our products are conform to the
international standards.
We have been specializing in manufacturing pressure, level and flow
measuring instruments and related products for 10 years. We have
experienced technical and management personnel, through the efforts
of our entire staff, we have become a professional measuring
instrument manufacturer and solution provider. And we are
continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regards “reasonable prices, efficient production
time and good after-sales service” as our tenet, and hope to
cooperate with more customers for mutual development.
Website www.kacise.com
Phone +86-17719566736
Email sales@kacise.com
Location Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi
Province, China
