Full height automatic smart DC brushless motor glass sliding
turnstile door for security control
General introduction:
Intelligent speed gate is mainly used to prevent pedestrians
illegally drilled or climbing places to implement the entrance and
exit control management of high-tech products, its shape with
international stainless steel profiles, fine craft, full-featured,
nice, rust, durable, can resist external damage.The equipment
integration mechanical, electronic, microprocessor control of
electronic ticket system, access control attendance system, parking
system, face recognition system, anti-static, fingerprint, palm,
iris and other biometric identification system integration and use.
Product photo
Functions & Features:
1. Provide normally open / normally close to satisfy management
request.
2. Compatible with RF card readers, bar code readers, biometric
readers, push button...
3. Equipped with infrared photocell, alarm while unauthorized entry
or tailgating attempts, together with anti-strike function to
protect pedestrian.
4. Expanded to automatic identification system, access control
system, Traffic control, attendance check and fare collection
system etc.
5. Automatically reset : lock automatically while the pedestrian
not pass the lane in the pre-set time after the flap opened. The
passing time is adjustable.
6. Equipped with international interface, can be easily integrated
with other R/W device and managed through remote supervision
computer
7. Support gate open while power failure and recover N/C mode after
power on.
8. (Optional) Memory function. Can pass N pedestrians continuously
by swiping card N times correspondingly (N<=16)
9. (Optional) Reversed passing alarm function, barrier will alarm
if pedestrian pass from opposite direction after reading the card.
10. One direction or bi-direction is optional.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control
of software.
15. Stable running with little noise.
Production dimension:
Technicial specifications:
Housing size | 1400 long * 300 wide * 1000 high (MM) |
Working direction | Single or bi-direction |
Housing material | 304 Stainless steel with the thickness of 1.5mm |
Power supply | AC200±10％V/50±10％Hz |
Driving electromotor | 24V DC |
Input interface | relay switch signal or 12V level signal or pulse width> 100ms
12V pulse signal, drive current> 10mA |
LED indicator | 2 |
Card reader windows | 2 |
Pass speed | 40 persons/min (normal open),25~30 persons/min(normal close) |
Gate open, off time | 1~2s |
The time required to enter the state after power on | 3s |
Working environment | Indoor, outdoor (with a tent over) |
Temperature | -20℃ to 60℃ |
Relative humidity | ≤ 90%, no condensation |
Case reference:
