Full automatic printer ET-F1200
Machine specifications:
| Model | ET-F1200 |
| Item | |
| Screen Frames | Min Size | 737X300mm |
| Max Size | 1500X750mm |
| Thickness | 25~40mm |
| PCB Min Size | 80X50mm |
| PCB Max Size | 1200X350mm |
| PCB Thickness | 0.4~6mm |
| PCB Warpage | <1% |
| Transport Height | 900±40mm |
| Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right |
| Transport Speed | Max 1500mm/S Programmable |
Board Location
PCB | Support System | Magnetic Pin/Up-down table adjusted/supportblock
by hand |
| Clamping System | Elastic side clamp/Z press |
| |
| Squeegee Speed | 6~200mm/sec |
| Squeegee Pressure | 0~15Kg |
| Squeegee Angle | 60°/55°/45° |
| Squeegee Type | Stainless steel(Standard), plastic |
| Stencil Separation Speed | 0.1~20mm/sec Programmable |
| Cleaning System | Dry,Wet,Vacuum (Programmable) |
| Table Adjustment ranges | X:±10mm;Y:±10mm;θ:±2° |
| Machine | |
| Repeat Position Accuracy | ±0.015mm |
| Printing Accuracy | ±0.03mm |
| Cycle Time | <12s (Exclude Printing & Cleaning) |
| Product Changeover | <5Min |
| Air Required | 4.5~6Kg/cm2 |
| |
| Control Method | PC Control |
| Machine Dimensions | 2200(L)X1200(W)X1500(H)mm |
| Machine Weight | Approx:1500Kg |
Features:
Maximum transmission speed 1500mm/S programmable
Support system magnetic pin/upper and lower table
adjustment/support block
Clamping system elastic side clamp /Z press
Blade speed 6 ~ 200 mm/s
Scraper stainless steel (standard), plastic
Steel mesh separation speed 0.1~20mm/ s programmable
Dry, wet and vacuum cleaning system (programmable)
Product conversion < 5 minutes
ShenZhen ETON Automation Equipment Co.,LTD.is a leading
manufacturer of automatic SMT machine.In 2011,set up ShenZhen Eton
Automation Equipment Co.,Ltd.In 2011,HT-12 series began selling.In
2011,HT-E3 was complete research and development (Eton 3 generation
machine).
Working principle :
First the printed circuit board is fixed on the printing
positioning table, and then the solder paste or red glue is
misprinted on the corresponding welding pad through the steel mesh
by the left and right scraper of the printing machine, and the
misprinted PCB is input to the mounter through the transfer table
for automatic mounter.
Advantages:
1, applicable to any material, compatible with a wide range of
surfaces.
2, no plate making, printing fast and cheap, can be used in a
variety of output software, support a variety of file formats.
3. Equipped with professional color management software, you can
change colors anytime and anywhere without paying extra fees.
4. One-step completion, namely printing and taking, to meet the
demand of quick sample and finished product.
5, unit price starting printing large quantities can be matched
with template printing, save time and effort, full-color image,
complete at one time, progressive color completely achieve photo
quality effect, accurate positioning, rejection rate is zero.
7, only 30 minutes, you can master, make high-quality products, no
need for professional skills.
8, computer operation, no personnel dependence, large space for
upgrading.
Our Services
1. offer detail manual user .
2. customer to our factory study and training .
3. offer overseas service : can send engineers
4. to customer factory for install
