Sign In | Join Free | My burrillandco.com
Home > Plastic & Rubber Machinery >

Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant

    Buy cheap Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant from wholesalers
     
    Buy cheap Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant from wholesalers
    • Buy cheap Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant from wholesalers
    • Buy cheap Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant from wholesalers

    Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant

    Ask Lasest Price
    Brand Name : KACISE
    Model Number : KLD-2601
    Certification : CE
    Price : Negotiable
    Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram, Paypal
    Supply Ability : 1000 Piece/Pieces per Week negotiable
    Delivery Time : 5-8 work days
    • Product Details
    • Company Profile

    Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant

    Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant

    Product Overview
    This radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 80 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment

    Principle
    Radar level transmitter antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous)


    A Range set B Low adjustment C High D Blind area


    Datum Measurement:Screw thread bottom or the sealing surface of the flange
    Note:Make sure the radar level meter the highest level cannot enter the measuring blind area (Figure D shown below).

    The Characteristics of 26G Radar Level Meter
    Small antenna size, easy to install; Non-contact radar, no wear, no pollution.
    Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.
    Serious dust environment on the high level meter work has little effect.
    A shorter wavelength, the reflection of solid surface inclination is better.
    Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
    The measuring range is smaller, for a measurement will yield good results.
    High signal-to-noise ratio, the level fluctuation state can obtain better performance.
    High frequency, measurement of solid and low dielectric constant of the best choice.

    Technical Parameters

    Housing

    Seal between housing and

    housing cover

    Silicone rubber
    Housing windowPolycarbonate
    The ground terminalStainless steel
    The power supply voltage
    Two wireThe standard type(16 ~ 26) V DC
    Intrinsically safe(21.6 ~ 26.4) V DC
    Power dissipationmax 22.5mA / 1W
    Allowable ripple- <100HzUss<lV
    - (100~100K) HzUss<l0mV
    The cable parameters
    Cable entrance / plug1 M20xl.5 cable entrance
    1 blind plug
    TerminalConductor cross section 1.0mm²
    OutputThe output signal(4 ~ 20) mA
    Communication protocolHART
    Resolution1.6μ A
    Fault signal

    Constant current output;

    20. 5mA, 22mA, 3.9mA

    The integral time(0 ~ 50) s, adjustable
    Blind zonethe ends of the antenna
    Max. measuring range80m
    Microwave frequency26GHz
    Communication interfaceHART communication protocol
    The measurement intervalabout 1 second (depending on the parameter settings)
    Adjustment timeabout 1 second (depending on the parameter settings)
    Display resolution1 mm

    Working storage and

    transportation temperature

    (-40~100) ℃
    Process temperature (the temperature of the antenna part)(-40~250)℃
    PressureMax.4MPa
    SeismicMechanical vibration l0m/s², (10 ~ 150) Hz



    Safty Instructions

    Please observe the local electrical code requirements!

    Please comply with local requirements for personnel health and safety regulations.

    All electrical components of instrument operation must be completed by the formal training of professionals.

    Please check the instrument nameplate to provide product specifications meet your requirements.
    Please make sure that the power supply voltage and instrument nameplate on the requirements.

    Protection Grade
    This instrument meets the protection class IP66/67 requirements, please ensure the waterproof cable sealing head. The following diagram




    How to install to meet the requirements of IP67
    Please make sure that the sealing head is not damaged. Please make sure that the cable is not damaged.
    Please make sure that the cable for use with electrical connection specification.
    Cable into the electrical interface before its curved downward, ensure that the water will not flow into the shell, see the①
    Tighten the cable seal head, see the②
    Please electrical interface will not use blind plug tight, see the③

    Instrument Commissioning
    There are three kinds of debugging method
    1) Display / Keyboard
    2) Host debugging
    3) HART handheld programmer

    Appearance Size

    Meter Linearity
    Emission angle 20°

    Precision See chart


    Product Model Selection



    License
    P Standard (Non-explosion-proof)
    I Intrinsically safe (Exib IIC T6 Ga)
    D Intrinsically safe and Isolated explosion proof (Exd (ia) IIC T6 Gb)
    Antenna Type / Material / Temperature
    F Sealing horn / PTEE / -40... 130 ℃
    Process Connection / Material
    G Thread G1½″ A
    N Thread 1½″ NPT
    A Flange DN50/PP
    B Flange DN80/PP
    C Flange DN100/PP
    Y Special custom
    Vessel Connection Length
    A connection 100mm
    B customize
    The Electronic unit
    2 (4~20) mA / 24V DC / Two wire
    3 (4~20) mA / 24V DC / HART two wire
    4 (4~20) mA / 220V AC / Four wire
    5 RS485 / Modbus
    Shell/Protection Grade
    L Aluminum / IP67
    G Stainless steel / IP67
    Cable Line
    M M20x1.5
    N ½″ NPT
    Field Display/The Programmer
    A With
    X Without
    Quality Non Contact Radar Fluid Level Meter For Measuring Solid And Low Dielectric Constant for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Xi'an Kacise Optronics Co.,Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Fluid Level Meter products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0