FE SFP 10KM Distance Fiber Optic Module BIDI 1550nm/1310nm SM
155Mbps
PRODUCT DESCRIPTION
The transmitter section uses a multiple quantum well laser and is a
class 1 laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a limiting
post-amplifier IC.
The SFP Module compliants with Digital diagnostics functions are
available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP compliant form factor provides hot pluggability, easy
optical port upgrades and low EMI emission.
155Mbps SFP BIDI Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with
the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The
transceiver consists of five sections: the LD driver, the limiting
amplifier, the digital diagnostic monitor, the FP laser and the PIN
photo-detector .The module data link up to 10KM in 9/125um single
mode fiber.
Applications
Fiber Channel
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
PRODUCT FEATURES
Up to 155Mb/s Data Links
Hot-Pluggable
Single LC connector
Up to 10 km on 9/125μm SMF
1550nm FP laser transmitter
1310nm PIN-TIA
Single +3.3V Power Supply
Monitoring Interface Compliant with SFF-8472
Maximum Power <1W
Industrial / Commercial operating temperature range: -40°C to
85°C/0°C to 70°C Version available
2 years warranty
Specification of Transmitter
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Average Output Power | POUT | -9 | | -3 | dBm | Note (1) |
| Extinction Ratio | ER | 8.2 | | | dB | |
| Center Wavelength | λC | 1500 | 1550 | 1580 | nm | FP Laser |
| | | | | |
| Spectrum Bandwidth(-20dB) | σ | | | 4 | nm | |
| Differential Line Input Impedance | RIN | 90 | 100 | 110 | Ohm | |
| Output Eye Mask | Compliant with G.959(class 1 laser safety) | | Note (2) |
Note (1): Measure at 2^23-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition
Specification of Receiver
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Input Optical Wavelength | λIN | 1260 | 1310 | 1360 | nm | |
| Receiver Sensitivity | PIN | | | -30 | dBm | Note (1) |
| Los Of Signal Assert | PA | | | -40 | dBm | |
| Los Of Signal De-assert | PD | -35 | | | dBm | Note (2) |
| LOS Hysteresis | PA-PD | 0.5 | 2 | 6 | dB | |
| Receiver Overload | Pmax -PIN | | | -3 | dBm | |
Note (1): Measured with Light source 1310nm, ER=8.2dB; BER
=<10^-12 @PRBS=2^23-1 NRZ
Note (2): When LOS de-asserted, the RX data+/- output is High-level
(fixed)
