TGA Thermo Gravimetric Analyzer plastic rubber thermal tester
QUICK DETAILS
Thermo gravimetric analysis (TG, TGA) is the observation of the
quality of a sample as a function of temperature or time during
temperature rise, constant temperature or temperature reduction.
The purpose is to study the thermal stability and composition of
the material. Widely used in research and development, process
optimization and quality monitoring in various fields such as
plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic
materials, metal materials and composite materials.
APPLICATION
Used to study the thermal stability, decomposition process,
adsorption and desorption, oxidation and reduction of materials,
and quantitative analysis of components, additives and fillers
Widely used in research and development, process optimization and
quality monitoring in various fields such as plastics, rubber,
coatings, pharmaceuticals, catalysts, inorganic materials, metal
materials and composite materials.
ADVANTAGES
Structural advantages:
1. The furnace body is heated by double-row winding of precious
metal nickel-chromium alloy wire, which reduces interference and is
more resistant to high temperature.
2. The tray sensor is made of precious metal nickel-chromium alloy
and has the advantages of high temperature resistance, oxidation
resistance and corrosion resistance.
3. Power supply, the circulating heat dissipation part is separated
from the main unit to reduce the influence of heat and vibration on
the micro-heat balance.
4. It adopts the upper open cover structure and is easy to operate.
It is difficult to put the sample up the furnace and it is easy to
cause damage to the sample rod.
5. The main engine uses insulation to isolate the thermal influence
of the heating furnace on the chassis and the micro-heat balance.
6. Can replace the furnace body according to customer requirements
Controller and software advantages:
1. Imported 32bit ARM processor Cortex-M3 core, sampling speed,
processing speed is faster.
2.24bit four-way sampling AD collects DSC signals and TG signals
and temperature T signals.
3. The power supply and water circulation part is separately
controlled by 8bit single-chip microcomputer, so that the main unit
and the cooling part are separated, and they do not interfere with
each other, but the two are closely connected, and the cooling part
is controlled by the host.
4. USB two-way communication between the software and the
instrument, fully realize remote operation, the parameter setting
of the instrument and the running of the instrument can be stopped
by the computer software.
5. 7-inch full color 24bit touch screen, better man-machine
interface. TG calibration can be achieved on the touch screen
TECHNICAL PARAMETERS
| Model | TGA-101 |
| Temperature range | Room temperature ~1150 ° C, |
| Temperature resolution | 0.1 ° C |
| Constant temperature accuracy | ±0.1°C |
| Heating rate | 1~80°C/min |
| Temperature control method | Heating, constant temperature, cooling |
| Cooling time | 15min (1000°C-100°C) |
| Scale measurement range | 1mg ~ 2g, can be extended to 30g |
| Resolution | 0.01mg |
| Constant temperature preset time | 0 to 300min arbitrarily set |
| Gas effect | Inert, oxidizing, reducing, static, dynamic |
| Gas device | Built-in gas flow meter with two-way gas switching and flow rate
control |
| software | Intelligent software can automatically record TG curves for data
processing and print experimental reports |
| Data interface | Standard USB interface |
| Power supply | 220V 50HZ |
Packaging & Shipping
1. Aluminium box and carton box, careful and tight package, make
sure the package is intact
2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have
chose in the order.
Our Services
If you encounter with any problems during the testing process,we
promise providing urgent guidence and after-sales sevice within 48
hours and solution providing within 3 working days. If customers
require on-site service, the transport and travel expense shall be
responsible for the cost.
1. Pre-service
24 Hours online service for customers' consultation.
2. Middle service
--Fullfill customer's request:
--Payment method depends on customer.
--Promptly production and delivery
--Can provide invoice value if you want to decrease your tax.
3. After sale service
--One year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Remote control technical consult
