FTTH field
Traditional solution use ONU or FDH (Optical Network Unit/Fiber
Distribution Hub), when trunk optical cable arrives to outside of
mansions and villas. FTTX Enclosure can replace ONU or FDH because
it has fiber distribution function. Inside, it can be fixed 2-4pcs
1*8 or 1*16 PLC, and can be put 24pcs fiber splice protection
sleeves. After mating with 1-48F IP67 pre-assembled waterproof
connector, FTTX Enclosure can connect each mansion and villa or low
voltage silo directly. It can be fixed outside of mansions and
villas, or holding pole installation. FTTX Enclosure can reduce
signal loss through less connecting node. For in factory
pre-assembled FTTX Enclosure, it's no need high skill operator
because of no fiber splice operation. Installation efficiency can
be increased by 40%.
FTTA field
Traditionally, Remote Radio Unit (RRU) and Building Base band Unit
(BBU) connected by optical fiber cable, formed star network
topology. Each RRU need one duplex outdoor cable link to BBU.
Installation will need more time and cost will be high.FTTX
Enclosure work as an Aggregation/Demark box, link RRU and BBU
together. From BBU to FTTX Enclosure, only need one multi-fiber
hybrid cable. Then FTTX Enclosure divide fibers to each RRU through
IP67 pre-assembled waterproof cable assemblies. RRU can get power
through assembled power connector on FTTX Enclosure.It can avoid
needless duplication
Trunk Cable Connecting
Trunk cable needs to be fusion welded frequently because of each
drum cable length limited. So connecting point is weak and need to
be protected very well. When trunk cable comes into FTTX Enclosure,
it will be sealed and fixed by torsion proof cable gland (plastic
or metal type). For 5mm-14mm out diameter cable,FTTX Enclosure has
different accessories to fit. Torsion gland can release stress when
trunk cable bending and protect fiber avoid breaking. Inside of the
FTTX Enclosure, main cable and strength member were fixed by
fastener, which make sure the box can stand 1200N pulling force
long term. Splice protection sleeve (Max. 24pcs) and PLC (Max.2pcs)
can be fixed on the body, which make FTTX Enclosure fiber divided
very easy. Anti-skid design on the base case, which makes sure FTTX
Enclosure holds wire/pole firmly.
Prospecting or Military Communication(Military Field Operation)
The cable will be replayed frequently, when prospecting or military
communication. Normal connector and cable cannot stand frequently
and high strength pulling and reuse. Inside of the FTTX Enclosure,
armored cable and strength member were fixed by fastener, which
make sure the box can stand 1200N pulling force long term. It's
very suitable for field use, especially in star network
communications. High strength material and arc interface design
make sure FTTX Enclosure work abnormally when suffer shocks.
