Carbon Cleaning System For Cars 380V HHO Decarbonizer With 1 Year
Warranty
HHO Working Principle:
The hydrogen and oxygen atoms in the water are extracted by
electrolysis to form a hydrogen-oxygen mixed gas stream, which is
input into the engine combustion chamber via the engine intake
manifold. After the Brown gas fills the engine combustion chamber,
the ignition is ignited and the hydrogen-oxygen catalytic principle
is applied (at the high-temperature combustion process). It can
produce active atoms such as O, H and OH, on the one hand, it can
promote the high temperature cracking of medium and long
hydrocarbon chains in gasoline, and accelerate the oxidation
reaction.) The principle of oxyfuel combustion (wax and colloid in
gasoline are not pure) The material is also composed of a long
hydrocarbon chain or an ultra-long hydrocarbon chain. Active atoms
such as O, H and OH can also accelerate its cracking, and finally
remove carbon deposits. The Brown gas characteristics such as the
principle of water and hydrogen circulation are comprehensive for
engine carbon deposition. Completely remove and restore the power
of the car, and will not cause any damage to the engine, avoiding
the shortage of traditional chemical decarburizer
Product Description:
The HHO carbon cleaning machine produced by Zeayeto has different
shape compared with the others. And it has HD touch screen, which
can make the operation easier. What makes it differ from the
traditional carbon cleaning way is easier operation and more
environmental friendly. There is no need to take the engine part
down and no need to use the chemical cleaning agent for carbon
cleaning, it just connect with the intake manifold and then put the
hydrogen and oxygen into engines.
Parameters:
| Model Number | HO-1500 |
| Voltage | AC 110V/220V/230V/380V |
| Frequency | 50/60HZ |
| Rated Power | <6KW |
| Gas Output | 1500L/h ±10% |
| Working Pressure | ≤0.2 Mpa |
| Weight | 120kg |
| Size | 600*600*1100mm |
| Package Dimension | 630*670*1270mm |
| Ambient temperature range | 5°C~50°C |
Operation Instruction:
1. Connect the outlet pipe of the equipment to the vacuum pipe of
the vehicle (For vehicles without vacuum pipe, insert the outlet
pipe directly from the air filter to the engine inlet pipe)
2. Start the vehicle at idle
3. Turn on the equipment power and select the corresponding exhaust
volume through the touch screen
4. Select negative pressure mode or vibration mode, and click the
start button to start carbon removal
5. After 30 minutes of decarbonization, the device will alarm,
indicating that the decarburization is completed and the equipment
will automatically stop gas production
6. After waiting for about 1 minute, turn off the engine and resume
the automobile pipeline.
7. Restart the vehicle
8. Step on the accelerator at a constant speed to a rotating speed
of 3,000-3500 RPM and then release, and then step on it at an
interval of 3 seconds. Repeat this for 8 ~ 10 times to expel the
water and dirt in the exhaust pipe and end the carbon removal
