High performance corrosion inhibitor injection skid for natural gas
Description:
1. Corrosion inhibitor pump remote start, stop and flow regulation.
2. Pump outlet pressure display.
3. Corrosion inhibitor pump status display.
4. Display tank level.
5. Corrosion inhibitor tank body pressure display.
6. Corrosion inhibitor tank fluid level display.
7. There should be enough maintenance room between skid internal
equipment.
8. Noise control: the noise generated by the equipment at 1m from
the sound source shall not exceed 85dB (A).
9. Valves in skid and pipeline are required to ensure good
tightness and wear resistance at the same time.
10.The skid meets the standard requirements of lightning protection
and anti-static.(the distribution box, distribution box and other
equipment with a ground mark shall be grounded; The door and flange
of 4 bolts must be bonded with wire.
11. Equipped with explosion-proof distribution box, starting
switch, current and voltmeter with corresponding function on the
skid, protection level of distribution box inside the skid is not
lower than IP65; Explosion proof grade shall not be lower than
dllBT4.
Technical parameters:
| 1 | Flow | 0.002-3 m3/h |
| 2 | Meidum | methyl alcohol, corrosion inhibitor |
| 3 | Injection pressure | 0.3-70 Mpa |
| 4 | Designed pressure | 1.6-100 Mpa |
| 5 | Tank capacity | 1-20 m3 |
| 6 | Designed temperature | -40-100 ℃ |
| 7 | Materials | 16Mn, 20III, 304, 20 |
| 8 | Overall measurement | ≤ 15X3X3.5 m |
| 9 | Weight | 5-35 ton |
