Reforcement Composite FRP Cable Tray Water Insulation ISO14001
ISO9001
Product Description
| Material: | Mild Steel/ Pre Galvanized Sheet/ Stainless Steel/ Aluminium/ FRP |
| Finish: | Electroplated Galvanize/ Hot Dip Galvanize/ Enamel Paint/ Powder
Coated/ Red Oxide |
| Std. Length: | 2500 MM |
| Std. Width: | Perforated: 50 MM to 800 MM Ladder Type: 50 MM to 1200 MM |
| Std. Height: | 25 MM to 150 MM |
| Std. Thickness: | 1.6 MM/ 2 MM/ 2.5 MM/ 3 MM |
| Accessories: | Horizontal/ Verticle Tee, Bend, Reducer, Elbow, Coupler Plate,
Hardware, Mounting Support etc. |
Product features:
1. Ladder type cable tray
Ladder type cable tray has advantages of light weight, low cost,
modeling unique, convenient installation, good ventilation and heat
dissipation etc..This bridge is suitable for laying cables with big
diameters, suitable for high and low voltage power cables.
2. Tray type cable tray
Tray type cable tray is widely used for oil, chemical industry,
light industry, telecommunications and other aspects .It has the
advantages of light weight, heavy load, beautiful appearance,
simple structure and convenient installation, etc.. It is suitable
for the installation of power cables and cable laying is on.
3. Slot type cable tray
Slot type cable tray is a fully enclosed type cable tray. It is
most suitable for laying computer cable, communication cable,
thermocouple cable and other highly sensitive system control
cables. The environmental cable control cable shielding
interference and heavy corrosion protection have good results.
Advantages:
1. Close to the electrical wiring bigger space to meet the
high-density cable
2. Approved by EU Rohs,Compliant with US UL 94V-0,good inflaming
3. Smooth edges in duct slots and at top of duct fingers
4. Will not slide easily when installed on duct base
5. Cover sits flush with sidewall
6. Smooth adge after punching
7. with or without the cover being installed
8. Suitable to different environments using
