300*500*12mm size crate machine , Horizontal Injection Molding
Machine For fruit Crate Making
Characteristics
1. Adopts the imported control components, durable, safe, and low
failure rate.
2. Use human-computer interface, simple and more visually oriented.
3. The machine uses machine electrical and air linkage, excellent
effect of bottom sealing.
4. East to adjust different sizes of cartons, adjust quickly and
easily, available for a wide range of cartons.
5. Low power consumption, simple and convenient operation, low
noise.
6. Use tap to seal the cartoon bottom, protected from weather,
sealing reliable.
Specification
| Injection Unit | UNIT | A | B | C | D |
| Screw diameter | mm | 90 | 95 | 105 | 110 |
| Screw L/D ratio | L/D | 23.2 | 22 | 19.9 | 19 |
| Shot size(theoretical) | CM³ | 2924 | 3258 | 3981 | 4369 |
| Injection weight(ps) | g | 2632 | 2933 | 3583 | 3932 |
| Injection rate | g/s | 574 | 640 | 781 | 858 |
| Injection pressure | Mpa | 195 | 175 | 143 | 130 |
| Screw speed | rpm | 115 |
| Clamping Unit | | |
| Clamp tonnage | KN | 7800 |
| toggle Stroke | Mm | 950 |
| Space Between tie Bars | mm | 980*950 |
| Max.mold height | mm | 960 |
| Min.mold height | mm | 400 |
| Ejector Stroke | Mm | 280 |
| Ejector tonnage | KN | 186 |
| Others | | |
| Max.pump pressure | Mpa | 16 |
| Pump motor power | KW | 37+30 |
| Heater power | kw | 56.7 |
| Machine size(L x W x H) | m | 11.43*2.4*3.14 |
| Machine weight | Ton | 37 |
| Oil tank capacity | L | 1500 |
1.How to choose injection molding machine?
The injection weight should be about 1.2× product's weight; The tie
bar space should be bigger than the mold dimension; Contact with us
for more information.
2.How to pay?
30% deposit T/T in advance, the balance 70% payment by T/T before
delivery (we accept payment by T/T, L/C etc.)
3.Is that possible for your company to send engineer to install
machine for commissioning, even train our workers?
Yes, we can send our engineer to your factory for installing,
commissioning, training. We have some engineers flying among
different countries for after sale service and technical support.
As per experience, if everything OK usually 5-15 days is enough.
Therefore, before shipment, we need you to prepare invitation
letter for visa. However, please be noted that all cost happened
for visa, travel, hotel should be paid in advance by customers. In
addition, we cannot guarantee each visa is successful.
4.If we buy your machines, is there any warranty?
Yes, definitely. Totally 24-months warranty after shipment for
mechanical parts, hydraulic parts, electric components (The screw
just has 6-months). We are responsible for broken parts within
24-months. We will supply those parts in freeway but the possible
transportation cost should be paid by clients.
5.What is different with A,B,C screw, What is the price different?
The screw model is designed for different material and
requirements, the screw diameter Changes from small, middle and
big. There is no price difference in the price for choosing A/B/C
screw types.
